ROHM BD1LBU50EFJ-CE2 Low Side, Low Side Power Switch IC 8-Pin, HTSOP-J8
- N° de stock RS:
- 265-5387
- Référence fabricant:
- BD1LBU50EFJ-CE2
- Fabricant:
- ROHM
Offre groupée disponible
Sous-total (1 paquet de 5 unités)*
6,00 €
(TVA exclue)
7,25 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 45 | 1,20 € | 6,00 € |
| 50 - 95 | 1,028 € | 5,14 € |
| 100 - 245 | 0,842 € | 4,21 € |
| 250 - 995 | 0,788 € | 3,94 € |
| 1000 + | 0,676 € | 3,38 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 265-5387
- Référence fabricant:
- BD1LBU50EFJ-CE2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Power Switch Topology | Low Side | |
| Product Type | Power Switch IC | |
| Power Switch Type | Low Side | |
| Switch On Resistance RdsOn | 0.35Ω | |
| Package Type | HTSOP-J8 | |
| Maximum Supply Voltage | 5.5V | |
| Pin Count | 8 | |
| Operating Current | 1mA | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -55°C | |
| Standards/Approvals | RoHS | |
| Height | 1mm | |
| Length | 6mm | |
| Series | BD1LBU50EFJ-C | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Power Switch Topology Low Side | ||
Product Type Power Switch IC | ||
Power Switch Type Low Side | ||
Switch On Resistance RdsOn 0.35Ω | ||
Package Type HTSOP-J8 | ||
Maximum Supply Voltage 5.5V | ||
Pin Count 8 | ||
Operating Current 1mA | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -55°C | ||
Standards/Approvals RoHS | ||
Height 1mm | ||
Length 6mm | ||
Series BD1LBU50EFJ-C | ||
Automotive Standard AEC-Q100 | ||
The ROHM BD1LB500 Series is an in-vehicle with 1ch low side switch. This switch builds in the overcurrent limiting circuit, thermal shutdown circuit, open load detection circuit and under voltage lock out circuit. It also provides the diagnostic output circuit when an abnormality is detected.
Low standby current
Built in under voltage lock out circuit
Built in open load detection circuit
Built in diagnostic output (ST) terminal
Built in overcurrent limiting circuit