STMicroelectronics High Side, USB Power Power Switch IC 10-Pin, DFN10L
- N° de stock RS:
- 240-0607P
- Référence fabricant:
- STELPD01PUR
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Consulter les options de prix de grosSous-total 10 unités (conditionné en bande continue)*
11,76 €
(TVA exclue)
14,23 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 10 - 95 | 1,176 € |
| 100 - 245 | 1,166 € |
| 250 - 495 | 1,16 € |
| 500 + | 1,15 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-0607P
- Référence fabricant:
- STELPD01PUR
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Power Switch Type | USB Power | |
| Power Switch Topology | High Side | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 50mΩ | |
| Interface Type | USB | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4V | |
| Package Type | DFN10L | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 18V | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 5A | |
| Length | 3.15mm | |
| Height | 1mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Series | STELPD01 | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Power Switch Type USB Power | ||
Power Switch Topology High Side | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 50mΩ | ||
Interface Type USB | ||
Mount Type Surface | ||
Minimum Supply Voltage 4V | ||
Package Type DFN10L | ||
Pin Count 10 | ||
Maximum Supply Voltage 18V | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
Operating Current 5A | ||
Length 3.15mm | ||
Height 1mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Series STELPD01 | ||
The STMicroelectronics Electronic load switch for power line is an integrated electronic power switch for power rail protection applications. It is able to precisely detect and react to overcurrent and overvoltage conditions. When an overload condition occurs, the device goes into an open state, disconnecting the load from the power supply. An external power MOSFET can be driven to manage the power loss protection in case of fault condition. In case of overvoltage on the input, the device regulates the output to a preset 17.5 V value, Under voltage lockout prevents the load from malfunction, keeping the device off if the rail voltage is too low. The STELPD01 features an adjustable turn-on slew-rate, which is useful to keep the in rush current under control during start-up and hot-swap operations.
Wide input voltage range: 4 V to 18 V
17.5 V typical output overvoltage clamp
Absolute maximum voltage of 23.5 V
5 A maximum continuous current
Thermal protection
Input under voltage lockout
Low inrush current during start-up
Integrated 40 mΩ Power FET