STMicroelectronics 1 Power Switch IC 10-Pin, SO
- N° de stock RS:
- 188-8398P
- Référence fabricant:
- VN340SPTR-33-E
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Sous-total 10 unités (conditionné en bande continue)*
46,70 €
(TVA exclue)
56,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 03 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 10 - 18 | 4,67 € |
| 20 - 48 | 4,415 € |
| 50 - 98 | 4,165 € |
| 100 + | 3,965 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-8398P
- Référence fabricant:
- VN340SPTR-33-E
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 0.2Ω | |
| Number of Inputs | 1 | |
| Mount Type | Surface | |
| Package Type | SO | |
| Minimum Supply Voltage | 1V | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 36V | |
| Operating Current | 1A | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Length | 9.47mm | |
| Height | 3.3mm | |
| Standards/Approvals | IEC 61131-2 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 0.2Ω | ||
Number of Inputs 1 | ||
Mount Type Surface | ||
Package Type SO | ||
Minimum Supply Voltage 1V | ||
Pin Count 10 | ||
Maximum Supply Voltage 36V | ||
Operating Current 1A | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
Length 9.47mm | ||
Height 3.3mm | ||
Standards/Approvals IEC 61131-2 | ||
Automotive Standard No | ||
The VN340SP-33-E is a monolithic device developed using STMicroelectronics’ VIPower technology, intended to drive four independent resistive or inductive loads with one side connected to ground. Active current limitation prevents dropping of the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short-circuit. The open drain diagnostic output indicates overtemperature conditions. Each I/O is pulled down when the overtemperature condition of the relative channel is verified.
Output current: 1 A per channel
Digital I/O clamped at 32 V minimum voltage
Shorted load and overtemperature protections
Protection against loss of ground
Built-in current limiter
Undervoltage shutdown
Open drain diagnostic output
Fast demagnetization of inductive loads