ROHM High Side, High Side Power Switch Power Switch IC 8-Pin, SOP
- N° de stock RS:
- 184-8007
- Référence fabricant:
- BV1HD090FJ-CE2
- Fabricant:
- ROHM
Sous-total (1 bobine de 2500 unités)*
2 332,50 €
(TVA exclue)
2 822,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 500 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2500 + | 0,933 € | 2 332,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 184-8007
- Référence fabricant:
- BV1HD090FJ-CE2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Power Switch Topology | High Side | |
| Power Switch Type | High Side Power Switch | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 500mΩ | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4.5V | |
| Package Type | SOP | |
| Maximum Supply Voltage | 36V | |
| Pin Count | 8 | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 5.5A | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | No | |
| Automotive Standard | AEC-Q100 | |
| Series | IPS | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Power Switch Topology High Side | ||
Power Switch Type High Side Power Switch | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 500mΩ | ||
Mount Type Surface | ||
Minimum Supply Voltage 4.5V | ||
Package Type SOP | ||
Maximum Supply Voltage 36V | ||
Pin Count 8 | ||
Minimum Operating Temperature -40°C | ||
Operating Current 5.5A | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals No | ||
Automotive Standard AEC-Q100 | ||
Series IPS | ||
BV1HD090FJ-C is an automotive 1ch high side switch IC, which has built-in overcurrent limiting circuit (OCP), thermal shutdown circuit (TSD), open load detection function (OLD) and under voltage lockout function (UVLO). It is also equipped with the diagnostic output when detecting an error (ST).
Built-in overcurrent limiting circuit (OCP)
Built-in thermal shutdown circuit (TSD)
Built-in open load detection function (at output OFF)
Direct control enabled from CMOS logic IC, etc.
Built-in under voltage lockout function
Built-in Output State Pin
On-Resistance RON=90mΩ (Typ) (VBB=14V, Tj=25°C, IOUT=0.5A)
Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip
Enables operation at low voltage down to 4.2V
Liens connexes
- ROHM BV1HV050FJ-CE2 High Side 1 SOP-J8
- ROHM High Side, High Side Power Switch IC
- ROHM BV1HLC45EFJ-CE2 High Side, High Side Power Switch IC
- ROHM BV1HD045EFJ-CE2 High Side, High Side Power Switch IC
- ROHM BV1HJ180EFJ-CE2 High Side, High Side Power Switch IC
- ROHM BV1HJC45EFJ-CE2 High Side, High Side Power Switch IC
- ROHM Low Side SOP-J8
- ROHM BD2055AFJ-E2 High Side Switch Power Switch IC 8-Pin, SOP