Power Integrations LNK603PG Flyback Converter 1, Off Liner Power Switch IC 7-Pin, DIP-C
- N° de stock RS:
- 123-5387
- Référence fabricant:
- LNK603PG
- Fabricant:
- Power Integrations
Sous-total (1 paquet de 5 unités)*
3,68 €
(TVA exclue)
4,455 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 915 unité(s) expédiée(s) à partir du 02 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 0,736 € | 3,68 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 123-5387
- Référence fabricant:
- LNK603PG
- Fabricant:
- Power Integrations
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Power Integrations | |
| Power Switch Topology | Flyback Converter | |
| Product Type | Power Switch IC | |
| Power Switch Type | Off Liner | |
| Number of Outputs | 5 | |
| Number of Inputs | 1 | |
| Mount Type | Through Hole | |
| Package Type | DIP-C | |
| Pin Count | 7 | |
| Maximum Supply Voltage | 700V | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 0.28mA | |
| Height | 3.68mm | |
| Length | 9.83mm | |
| Standards/Approvals | RoHS, EN55022 Class B | |
| Width | 6.6 mm | |
| Automotive Standard | No | |
| Series | LinkSwitch-II | |
| Sélectionner tout | ||
|---|---|---|
Marque Power Integrations | ||
Power Switch Topology Flyback Converter | ||
Product Type Power Switch IC | ||
Power Switch Type Off Liner | ||
Number of Outputs 5 | ||
Number of Inputs 1 | ||
Mount Type Through Hole | ||
Package Type DIP-C | ||
Pin Count 7 | ||
Maximum Supply Voltage 700V | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Operating Current 0.28mA | ||
Height 3.68mm | ||
Length 9.83mm | ||
Standards/Approvals RoHS, EN55022 Class B | ||
Width 6.6 mm | ||
Automotive Standard No | ||
Series LinkSwitch-II | ||
LinkSwitch-II, Power Integrations
The LinkSwitch-II dramatically simplifies low power CV/CC charger designs by eliminating an optocoupler and secondary control circuitry. The device introduces a revolutionary control technique to provide very tight output voltage and current regulation, compensating for transformer and internal parameter tolerances along with input voltage variations.,
Easily meets all global energy efficiency regulations
No-load consumption <200 mW at 230 VAC and down to below 30 mW with optional external bias
On/Off control provides constant efficiency down to very light loads – ideal for CEC and ENERGY STAR 2.0 regulations
No current sense resistors – maximizes efficiency