onsemi High Side 1, High Side Power Switch IC 8-Pin, SOIC
- N° de stock RS:
- 121-7895
- Référence fabricant:
- UAA2016DG
- Fabricant:
- onsemi
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 121-7895
- Référence fabricant:
- UAA2016DG
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Switch IC | |
| Power Switch Type | High Side | |
| Power Switch Topology | High Side | |
| Number of Inputs | 1 | |
| Power Rating | 625mW | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | -10V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | -8V | |
| Maximum Operating Temperature | 85°C | |
| Operating Current | 0.9mA | |
| Minimum Operating Temperature | -20°C | |
| Length | 5mm | |
| Height | 1.5mm | |
| Standards/Approvals | European Standard (Load Switching) | |
| Series | UAA2016 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Switch IC | ||
Power Switch Type High Side | ||
Power Switch Topology High Side | ||
Number of Inputs 1 | ||
Power Rating 625mW | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage -10V | ||
Pin Count 8 | ||
Maximum Supply Voltage -8V | ||
Maximum Operating Temperature 85°C | ||
Operating Current 0.9mA | ||
Minimum Operating Temperature -20°C | ||
Length 5mm | ||
Height 1.5mm | ||
Standards/Approvals European Standard (Load Switching) | ||
Series UAA2016 | ||
Automotive Standard No | ||
- Pays d'origine :
- PH
Zero Voltage Switching Controllers
Zero-voltage switching Triac trigger/driver ciruits which facilitate RFI-free power regulation of resistive loads.
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.