Microchip MIC2039EYM6-TR High Side 1, High Side Power Switch IC 6-Pin, SOT-23-6
- N° de stock RS:
- 598-307
- Référence fabricant:
- MIC2039EYM6-TR
- Fabricant:
- Microchip
Sous-total (1 bobine de 3000 unités)*
2 109,00 €
(TVA exclue)
2 553,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 29 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 3000 + | 0,703 € | 2 109,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 598-307
- Référence fabricant:
- MIC2039EYM6-TR
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Power Switch Topology | High Side | |
| Product Type | Power Switch IC | |
| Power Switch Type | High Side | |
| Switch On Resistance RdsOn | 125mΩ | |
| Number of Inputs | 1 | |
| Mount Type | Surface | |
| Package Type | SOT-23-6 | |
| Minimum Supply Voltage | 2.5V | |
| Pin Count | 6 | |
| Maximum Supply Voltage | 5.5V | |
| Operating Current | 300μA | |
| Minimum Operating Temperature | 40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | RoHS Compliant | |
| Series | MIC2039 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Power Switch Topology High Side | ||
Product Type Power Switch IC | ||
Power Switch Type High Side | ||
Switch On Resistance RdsOn 125mΩ | ||
Number of Inputs 1 | ||
Mount Type Surface | ||
Package Type SOT-23-6 | ||
Minimum Supply Voltage 2.5V | ||
Pin Count 6 | ||
Maximum Supply Voltage 5.5V | ||
Operating Current 300μA | ||
Minimum Operating Temperature 40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals RoHS Compliant | ||
Series MIC2039 | ||
Automotive Standard No | ||
The Microchip High side MOSFET power distribution switch provides increased system reliability by using 5% current limit accuracy. It has an operating input voltage range from 2.5V to 5.5V, is internally current limited, and has thermal shutdown to protect the device and system. It is offered with either active-high or active-low logic level enable input controls. The device has an open drain fault status output flag with a built-in 32ms delay that asserts low during overcurrent or thermal shutdown conditions. The switch features an adjustable output current limit that is resistor programmable from 0.2A to 2.5A.
Soft start functionality
Undervoltage lockout
Fault status output flag
Logic controlled enable
Thermal shutdown