STMicroelectronics TDE1707BFPT Low Side/High Side Power Switch IC 8-Pin, SO-8
- N° de stock RS:
- 151-489P
- Référence fabricant:
- TDE1707BFPT
- Fabricant:
- STMicroelectronics
Offre groupée disponible
Sous-total 20 unités (conditionné en bande continue)*
70,40 €
(TVA exclue)
85,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 500 unité(s) expédiée(s) à partir du 26 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 20 - 198 | 3,52 € |
| 200 + | 3,25 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 151-489P
- Référence fabricant:
- TDE1707BFPT
- Fabricant:
- STMicroelectronics
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | STMicroelectronics | |
| Power Switch Topology | Low Side/High Side | |
| Product Type | Power Switch IC | |
| Minimum Supply Voltage | 6V | |
| Package Type | SO-8 | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 48V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 85°C | |
| Operating Current | 500mA | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| Series | TDE1707 | |
| Sélectionner tout | ||
|---|---|---|
Marque STMicroelectronics | ||
Power Switch Topology Low Side/High Side | ||
Product Type Power Switch IC | ||
Minimum Supply Voltage 6V | ||
Package Type SO-8 | ||
Pin Count 8 | ||
Maximum Supply Voltage 48V | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 85°C | ||
Operating Current 500mA | ||
Standards/Approvals No | ||
Automotive Standard No | ||
Series TDE1707 | ||
- Pays d'origine :
- CN
The STMicroelectronics integrated power switches with up to 48 V power supply capability. This device is dedicated to proximity detectors; its internal +5 V supply can be used to supply external circuits (please refer to AN495 and AN1213 on www.st.com). A signal is internally generated to Block the IN signal, and prevent the output switch, as long as an abnormal condition is detected. The power-on transition, as well as the chip over temperature and the output overcurrent, generate this signal.
Internal voltage clamping
Supply and output reversal protection
Thermal shutdown
GND and VS open wire protection