Références fabricant

Omron PCB Relay, 12V Coil, 5A Switching Current, DPDT

N° de stock RS:: 828-6763
Référence fabricant:: G2R-2-S 12VDC (S)
Fabricant:: Omron

Omron PCB Relay, 12V Coil, 5A Switching Current, DPDT

Offre groupée disponible

Consulter les options de prix de gros

Sous-total (1 unité)*

6,27 €

(TVA exclue)

7,59 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

41 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 - 4	6,27 €
5 - 9	6,10 €
10 +	5,93 €

*Prix donné à titre indicatif

N° de stock RS:: 828-6763
Référence fabricant:: G2R-2-S 12VDC (S)
Fabricant:: Omron

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Omron
	Product Type	Relay
	Coil Voltage	12V
	Contact Configuration	DPDT
	Mount Type	PCB
	Series	G2R
	Terminal Type	Plug-In
	Switching Current	5A
	Switching AC Voltage	380V
	Switching DC Voltage	125V dc
	Switching Power	600mW
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Coil Resistance	278Ω
	Length	29mm
	Height	35.5mm
	Standards/Approvals	UL, CSA
	Width	13mm
	Coil Power	0.53W
	Contact Material	Silver Tin Indium
	Contact Resistance	50mΩ

	Sélectionner tout
	Marque Omron
	Product Type Relay
	Coil Voltage 12V
	Contact Configuration DPDT
	Mount Type PCB
	Series G2R
	Terminal Type Plug-In
	Switching Current 5A
	Switching AC Voltage 380V
	Switching DC Voltage 125V dc
	Switching Power 600mW
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Coil Resistance 278Ω
	Length 29mm
	Height 35.5mm
	Standards/Approvals UL, CSA
	Width 13mm
	Coil Power 0.53W
	Contact Material Silver Tin Indium
	Contact Resistance 50mΩ

Pays d'origine :: MY

Omron G2R Series Relay, 12V Coil Voltage, DPDT Contact Configuration - G2R-2-S 12VDC (S)

This relay is an electromechanical switching device designed for control and signal applications in industrial environments. It operates from a 12V Coil and provides dual-pole changeover contacts for switching AC or DC loads. The unit is intended for PCB mounting and is suitable where compact, low-power control of circuits is required.

Features and Benefits:

• 0.53W Coil power reduces drive energy requirements
• 278Ω Coil resistance enables predictable drive characteristics
• DPDT contact arrangement allows independent dual-circuit switching
• AgSnIn contact material provides enhanced electrical endurance
• 5A switching current supports moderate load currents at up to 380V AC
• Plug-in terminals simplify replacement and installation

Applications

• Suitable for machine control panels requiring dual-circuit switching
• Ideal for signal routing in automation systems and PLC interfaces
• Used with test equipment for controlled AC and DC switching
• Can be used for small motor starter control and relay logic networks

What Coil voltage is required to operate it?

It requires a 12V Coil supply and is specified for that nominal Coil voltage.

What temperature range can it tolerate during operation?

The device is rated to operate down to -40°C and up to 70°C ambient.

How does it perform in terms of contact resistance?

Contact resistance is specified at 50mΩ, supporting low-voltage signal integrity.

Which mounting method is provided for circuit boards?

The unit is configured for direct PCB mounting with plug-in Terminal connectivity.

What approvals does it carry for industrial use?

It is certified to both UL and CSA standards for recognised safety compliance.

Approvals

UL508; CSA22.2; EN 61810-1; SEV; SEMKO

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.