Phoenix Contact PCB Power Relay, 24V dc Coil, 6A Switching Current, 4PDT
- N° de stock RS:
- 794-3800
- Référence fabricant:
- 2903670
- Fabricant:
- Phoenix Contact
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 794-3800
- Référence fabricant:
- 2903670
- Fabricant:
- Phoenix Contact
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Phoenix Contact | |
| Product Type | Power Relay | |
| Coil Voltage | 24V dc | |
| Contact Configuration | 4PDT | |
| Mount Type | PCB | |
| Series | REL-IR | |
| Terminal Type | Plug-In | |
| Switching Current | 6A | |
| Switching DC Voltage | 36V dc | |
| Minimum Operating Temperature | -40°C | |
| Switching AC Voltage | 30V ac | |
| Maximum Operating Temperature | 70°C | |
| Coil Resistance | 640Ω | |
| Length | 21.2mm | |
| Height | 35.6mm | |
| Coil Power | 77mW | |
| Width | 21.2mm | |
| Standards/Approvals | DIN, IEC | |
| Contact Material | Silver Alloy | |
| Sélectionner tout | ||
|---|---|---|
Marque Phoenix Contact | ||
Product Type Power Relay | ||
Coil Voltage 24V dc | ||
Contact Configuration 4PDT | ||
Mount Type PCB | ||
Series REL-IR | ||
Terminal Type Plug-In | ||
Switching Current 6A | ||
Switching DC Voltage 36V dc | ||
Minimum Operating Temperature -40°C | ||
Switching AC Voltage 30V ac | ||
Maximum Operating Temperature 70°C | ||
Coil Resistance 640Ω | ||
Length 21.2mm | ||
Height 35.6mm | ||
Coil Power 77mW | ||
Width 21.2mm | ||
Standards/Approvals DIN, IEC | ||
Contact Material Silver Alloy | ||
- Pays d'origine :
- PL
Phoenix Contact Power Relay, Plug-In Terminals, 20,000,000Cycles Mechanical Service Life - REL-IR4/LDP- 24DC/4X21AU - 2903670
Need a reliable way to let your circuit know when to open and close? Use this power relay from Phoenix Contact to deliver the message. With a typical response time of 13ms and a release time of 14ms, it swiftly responds to electrical commands to change the state of the contacts. An LED signal is on hand to highlight its status so you can tell ata
glance when it's on.
As it's designed for PCB mounting, you can install this unit in a jiffy by attaching it to your board. The plug-in terminal design takes away the hassle of setting up the wiring you only need to insert conductors into the port. To ensure the relay's up to the challenge of controlling your circuit, use the built-in test button to put it through its paces before installation.
Features & Benefits
• Complies with IEC 61810 regulations for use in low-voltage devices
• Mechanical service life of 20,000,000 cycles for durable performance
• Low switching current of 6A for energy efficiency
• Can be mounted in any position for flexibility
• Contacts are plated in gold for resistance to corrosion
Liens connexes
- TE Connectivity Power Relay 6A Switching Current, 4PDT
- Siemens Power Relay 6A Switching Current, 4PDT
- Siemens Power Relay 6A Switching Current, 4PDT
- RS PRO Power Relay 6A Switching Current, 4PDT
- RS PRO Power Relay 6A Switching Current, 4PDT
- Idec PCB Power Relay 6A Switching Current, 4PDT
- Phoenix Contact PCB Power Relay 6A Switching Current, 4PDT
- Turck Power Relay 6A Switching Current, 4PDT