Références fabricant

Omron Surface Power Relay, 100V ac Coil, 15A Switching Current, SPDT

N° de stock RS:: 192-463
Référence fabricant:: LY1F AC100/110
Fabricant:: Omron

Omron Surface Power Relay, 100V ac Coil, 15A Switching Current, SPDT

Actuellement indisponible

Désolés, nous ne savons pas quand ce produit sera réapprovisionné.

N° de stock RS:: 192-463
Référence fabricant:: LY1F AC100/110
Fabricant:: Omron

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Omron
	Coil Voltage	100V ac
	Product Type	Power Relay
	Contact Configuration	SPDT
	Mount Type	Surface
	Series	LY
	Terminal Type	Plug-In
	Switching Current	15A
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	250V ac
	Switching DC Voltage	125V dc
	Switching Power	400W
	Coil Resistance	3750Ω
	Maximum Operating Temperature	55°C
	Standards/Approvals	VDE, CE, CSA, EN 61810-1, EN 61984, IEC (TÜV), LR, UL
	Contact Material	Silver Alloy
	Contact Resistance	50mΩ

	Sélectionner tout
	Marque Omron
	Coil Voltage 100V ac
	Product Type Power Relay
	Contact Configuration SPDT
	Mount Type Surface
	Series LY
	Terminal Type Plug-In
	Switching Current 15A
	Minimum Operating Temperature -25°C
	Switching AC Voltage 250V ac
	Switching DC Voltage 125V dc
	Switching Power 400W
	Coil Resistance 3750Ω
	Maximum Operating Temperature 55°C
	Standards/Approvals VDE, CE, CSA, EN 61810-1, EN 61984, IEC (TÜV), LR, UL
	Contact Material Silver Alloy
	Contact Resistance 50mΩ

Datasheet - LY1F AC100/110

Pays d'origine :: JP

Omron Series LY Power Relay, 100V AC Coil Voltage, 15A Switching Current - LY1F AC100/110

This power relay is a plug-in electrical switching device designed for industrial control and automation environments. It controls AC and DC loads through a single-pole double-throw contact arrangement, supporting common factory and process applications where dependable switching of moderate currents and voltages is required. The unit operates within typical ambient temperature limits for equipment rooms and plant installations.

Features and Benefits:

• 15A switching current for handling moderate load demands
• 250V AC switching voltage for mains-level AC control
• 125V DC switching capability for DC load applications
• 100V AC Coil with 3750Ω resistance for predictable Coil drive
• Silver-alloy contacts to reduce contact wear and improve conductivity
• Plug-in terminals and surface mountability for Rapid installation

Applications

• Suitable for motor starter control in industrial automation panels
• Ideal for switching heater circuits in process equipment
• Used with control timers and PLC outputs for signal routing
• Can be used for switching DC actuator supplies in machinery
• Suitable for replacement in control cabinets requiring plug-in relays

What ambient temperatures can it tolerate during operation?

It is rated to operate between -25°C and 55°C, suitable for typical indoor industrial environments.

How does the contact configuration affect wiring options?

The SPDT arrangement provides one common contact with both normally open and normally closed outputs, enabling changeover switching without additional relays.

What approvals support use in regulated installations?

It carries multiple standards approvals including VDE, CE, CSA, EN61810-1, EN61984, IEC (TÜV), LR and UL indicating compliance with recognised safety and performance criteria.

What is the expected contact resistance and its relevance?

Contact resistance is specified at 50mΩ, which helps limit voltage drop and heating across the contacts under load.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.