M5Stack SERVO2 Module 16 Channels - 13.2 Motor Driver for PCS9685, SY8368AQQC for M5StickC, M5 Core, M5StickV
- N° de stock RS:
- 230-5115
- Numéro d'article Distrelec:
- 301-96-873
- Référence fabricant:
- M014-B
- Fabricant:
- M5Stack
Sous-total (1 unité)*
16,22 €
(TVA exclue)
19,63 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s)
- Plus 19 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 16,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 230-5115
- Numéro d'article Distrelec:
- 301-96-873
- Référence fabricant:
- M014-B
- Fabricant:
- M5Stack
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | M5Stack | |
| Power Management Function | Motor Driver | |
| Product Type | Motor & Robotic Development Tool | |
| For Use With | M5StickC, M5 Core, M5StickV | |
| Kit Classification | Motor Driver Board | |
| Featured Device | PCS9685, SY8368AQQC | |
| Kit Name | SERVO2 Module 16 Channels - 13.2 | |
| Standards/Approvals | No | |
| Distrelec Product Id | 30196873 | |
| Sélectionner tout | ||
|---|---|---|
Marque M5Stack | ||
Power Management Function Motor Driver | ||
Product Type Motor & Robotic Development Tool | ||
For Use With M5StickC, M5 Core, M5StickV | ||
Kit Classification Motor Driver Board | ||
Featured Device PCS9685, SY8368AQQC | ||
Kit Name SERVO2 Module 16 Channels - 13.2 | ||
Standards/Approvals No | ||
Distrelec Product Id 30196873 | ||
- Pays d'origine :
- CN
The M5Stack SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. The maximum total power output of dual channel is 35W (5V / 3.5A * 2), and the maximum output power of single channel is 25W (5V / 5A). When the battery base is used for power supply, the maximum output power is 5V / 2A. The module communicates with the host directly through I2C (the default address is 0x40) however the I2C address can be changed(0x40 - 0x47) through the dial switch. This also means that multiple Servo 2 modules can be stacked and used simultaneously. There is a power switch on the board to control the power supply of
16x actuator driv e channel
2X power indicator
I2C address adjustable
External DC power supply input: 6-12V
DC connector ty pe: XT60
Liens connexes
- M5Stack GRBL Module 13.2 Stepmotor Driver Motor Driver for ATmega328P-AU M5StickC, M5StickV
- M5Stack U097 for use with M5 Core M5StickV
- M5Stack U105 for use with M5 Core M5StickV
- M5Stack U102 for use with M5 Core M5StickV
- M5Stack U086 for use with M5 Core M5StickV
- M5Stack U119 for use with M5 Core M5StickV
- M5Stack U118 for use with M5 Core M5StickV
- M5Stack U087 for use with M5 Core M5StickV