STMicroelectronics 2 A Synchronous Step-Down Switching Regulator, 38 V Step-Down Regulator for A6986H

Voir la catégorie

Sous-total (1 unité)*

33,22 €

(TVA exclue)

40,20 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Pénurie d'approvisionnement
  • Plus 8 unité(s) expédiée(s) à partir du 09 décembre 2025
Notre stock actuel est limité et nos fournisseurs s'attendent à des pénuries.
Unité
Prix par unité
1 +33,22 €

*Prix donné à titre indicatif

N° de stock RS:
193-1112
Référence fabricant:
STEVAL-ISA205V1
Fabricant:
STMicroelectronics
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

STMicroelectronics

Power Management Function

Step-Down Regulator

Kit Classification

Evaluation Board

Featured Device

A6986H

Kit Name

2 A Synchronous Step-Down Switching Regulator, 38 V

Pays d'origine :
IT
The STEVAL-ISA205V1 product evaluation board is based on the synchronous step-down switching regulator A6986H that can deliver up to 2 A and withstand cold cranking across 100% duty cycle, which, along with its wide input operating voltage range, render the A6986H the ideal choice for battery powered automotive systems.
Synchronous rectification helps to achieve higher efficiency at full load as well as application compactness, while high-frequency switching (programmable up to 2 MHz) helps to cut power passive costs and size, while staying outside of the AM band.
The device can operate in a Low Consumption Mode (LCM) with a quiescent current down to 30 μA at VIN = 12 V and VOUT = 3.3 V, hence assuring high efficiency at light loads, as required in typical car body applications that are active during car parking.
A Low Noise Mode (LNM) is also available to meet the requirements of infotainment applications of forced PWM mode in all loading conditions.
The default configuration of the board is output voltage set to 3.3 V configured in LCM, 500 kHz switching frequency, ISKIP current set to high level and the switchover feature disabled. All of these settings can be easily changed by the user to evaluate different application scenarios.

Liens connexes