STMicroelectronics Nucleo Pack

N° de stock RS:: 123-1061
Référence fabricant:: P-NUCLEO-IHM002
Fabricant:: STMicroelectronics

Offre groupée disponible

Sous-total (1 unité)*

51,78 €

(TVA exclue)

62,65 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 75,00 €

Dernier stock RS

1 restante(s), prêt à être expédié
Plus 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Unité	Prix par unité
1 - 4	51,78 €
5 - 9	50,45 €
10 +	49,19 €

*Prix donné à titre indicatif

N° de stock RS:: 123-1061
Référence fabricant:: P-NUCLEO-IHM002
Fabricant:: STMicroelectronics

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	STMicroelectronics
	Kit Classification	Development Kit
	Kit Name	Nucleo Pack

	Sélectionner tout
	Marque STMicroelectronics
	Kit Classification Development Kit
	Kit Name Nucleo Pack

P-NUCLEO-IHM002 BLDC Motor Control Development Kit and Power Supply

The STM32 Nucleo pack P-NUCLEO-IHM002 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board, the motor and the DC power supply. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection.

The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe.

The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier.

The Arduino connectivity support and ST Morpho headers make it easy to expand.

The P-NUCLEO-IHM002 pack includes the DC power supply unit.

X-NUCLEO-IHM07M1 features

3 phase driver board for BLDC/PMSM motors based on L6230

Nominal operating voltage range from 8 V to 48 V dc

2.8 A output peak current (1.4 A root mean square)

Non-dissipative overcurrent detection and protection

Full compatible with ST 6-step or ST-FOC-control algorithm

Full support for sensorless and sensor mode

3-Shunt and 1-Shunt configurable jumpers for motor current sensing

Hall encoder motor sensor connector and circuit

Potentiometer available for speed regulation

Compatible with STM32 Nucleo boards

Equipped with ST Morpho connectors

NUCLEO-F302R8 features

STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM

Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os

Mbed-enabled (http://mbed.org)

On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1

Two push buttons: "User" and "Reset"

3 phase motor

Bull-Running model BR2804-1700 kV

Nominal voltage 11.1 V dc (battery up to 3 S)

Maximum DC current: 5 A

Seven pole pairs

DC power supply

Nominal output voltage: 12 V dc

Maximum output current: 2 A

Nominal input voltage: 100 to 240 V ac

Nominal frequency: 50/60 Hz

STM32F3 Series 32-Bit ARM® Cortex®-M4 Microcontrollers, STMicroelectronics

The STM32 F3 series of mixed-signal MCUs with DSP and FPU instructions combines a 32-bit ARM Cortex-M4 core running at 72MHz with an advanced analogue peripheral set.

Fast comparators (50ns)

Programmable gain amplifiers (4 gain ranges)

12-Bit DACs

Fast 12-Bit ADCs (5 MSPS per channel with up to 18MSPS in interleaved mode)

16-Bit sigma-delta ADCs

Fast 144MHz motor control timers, timing resolution better 7ns