EPCOS, B84299 16A 440 V 50 Hz, 60 Hz, Chassis Mount Power Line Filter, Solder 3 Phase
- N° de stock RS:
- 280-4956
- Référence fabricant:
- B84299D2160E001
- Fabricant:
- EPCOS
Sous-total (1 unité)*
2 084,28 €
(TVA exclue)
2 521,98 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 1 unité(s) expédiée(s) à partir du 22 décembre 2025
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 084,28 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 280-4956
- Référence fabricant:
- B84299D2160E001
- Fabricant:
- EPCOS
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | EPCOS | |
| Maximum Current Rating | 16A | |
| Maximum Voltage Rating | 440 V | |
| Mounting Type | Chassis Mount | |
| Termination Style | Solder | |
| Number of Phases | 3 | |
| Series | B84299 | |
| Operating Frequency | 50 Hz, 60 Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque EPCOS | ||
Maximum Current Rating 16A | ||
Maximum Voltage Rating 440 V | ||
Mounting Type Chassis Mount | ||
Termination Style Solder | ||
Number of Phases 3 | ||
Series B84299 | ||
Operating Frequency 50 Hz, 60 Hz | ||
- Pays d'origine :
- HU
The TDK Filters designed for shielded rooms with rated voltages of 250 V/440 V and 16 A rated current. These filters come in 2 line configurations. This filter provides stopband attenuation in the frequency range of 150 kHz to 40 GHz. This filter designed with electrical components which are incorporated in an RF tight case of stainless steel. The cables enter through glands. The RF tight termination of the openings is produced by specially shaped lids. The conductors and equipment grounding conductor are connected by threaded bolts. The surface around the fixing holes is left as bare metal to ensure good RF contact with metal surfaces.
Use of single chokes
Insertion loss to EN 55017
Separate lines without inter coupling
Insertion loss to EN 55017
Separate lines without inter coupling
