Roxburgh EMC, IHF 50A 480 V ac 60Hz, Flange Mount RFI Filter, Stud, Single Phase
- N° de stock RS:
- 188-9185
- Référence fabricant:
- IHF450
- Fabricant:
- Roxburgh EMC
Offre groupée disponible
Sous-total (1 unité)*
259,52 €
(TVA exclue)
314,02 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 10 unité(s) expédiée(s) à partir du 09 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 259,52 € |
| 5 - 9 | 241,36 € |
| 10 - 24 | 225,78 € |
| 25 + | 212,82 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 188-9185
- Référence fabricant:
- IHF450
- Fabricant:
- Roxburgh EMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Roxburgh EMC | |
| Maximum Current Rating | 50A | |
| Maximum Voltage Rating | 480 V ac | |
| Mounting Type | Flange Mount | |
| Termination Style | Stud | |
| Number of Phases | 1 | |
| Series | IHF | |
| Operating Frequency | 60Hz | |
| Length | 230mm | |
| Depth | 147mm | |
| Capacitance | 2.2µF | |
| Height | 55mm | |
| Dimensions | 230 x 147 x 55mm | |
| Inductance | 280 μH | |
| Leakage Current | 3.5 mA | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | +85°C | |
| Resistance | 1mΩ | |
| Power Loss | 2.5W | |
| Standards Met | EN 60939 | |
| Sélectionner tout | ||
|---|---|---|
Marque Roxburgh EMC | ||
Maximum Current Rating 50A | ||
Maximum Voltage Rating 480 V ac | ||
Mounting Type Flange Mount | ||
Termination Style Stud | ||
Number of Phases 1 | ||
Series IHF | ||
Operating Frequency 60Hz | ||
Length 230mm | ||
Depth 147mm | ||
Capacitance 2.2µF | ||
Height 55mm | ||
Dimensions 230 x 147 x 55mm | ||
Inductance 280 μH | ||
Leakage Current 3.5 mA | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature +85°C | ||
Resistance 1mΩ | ||
Power Loss 2.5W | ||
Standards Met EN 60939 | ||
- Pays d'origine :
- GB
IHF/MDF Series
Motor drive filters suitable for a wide range of industrial motor applications
IHF variants offer three phase and neutral connection with low leakage current, (≤3.5mA)
MDF variants offer higher performance for applications where leakage current is not a limiting factor (three phase connection with no neutral)
Designed to comply with IEC950 safety standards, when installed correctly these filters allow compliance with VDE0871, EN55011 (Industrial) and EN55022 (Domestic) emission levels
IHF variants offer three phase and neutral connection with low leakage current, (≤3.5mA)
MDF variants offer higher performance for applications where leakage current is not a limiting factor (three phase connection with no neutral)
Designed to comply with IEC950 safety standards, when installed correctly these filters allow compliance with VDE0871, EN55011 (Industrial) and EN55022 (Domestic) emission levels
Approvals
IEC950; VDE0871; EN55011; EN55022
Liens connexes
- Roxburgh EMC Flange Mount RFI Filter, Single Phase
- Roxburgh EMC Flange Mount RFI Filter Single Phase
- Roxburgh EMC Flange Mount RFI Filter Single Phase
- Roxburgh EMC Flange Mount RFI Filter, Stud 3 Phase
- Roxburgh EMC Panel Mount RFI Filter, Single Phase
- Roxburgh EMC Flange Mount RFI Filter Single Phase
- Roxburgh EMC Flange Mount RFI Filter Single Phase
- Roxburgh EMC Flange Mount RFI Filter, Stud 3 Phase