ROHM BD7695FJ-E2, Power Factor Correction IC 8-Pin, SOP-J8 38V
- N° de stock RS:
- 266-3783
- Référence fabricant:
- BD7695FJ-E2
- Fabricant:
- ROHM
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 266-3783
- Référence fabricant:
- BD7695FJ-E2
- Fabricant:
- ROHM
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ROHM | |
| Product Type | Power Factor Correction IC | |
| Start-up Supply Current | 60μA | |
| Maximum Source Current | 130μA | |
| Sub Type | Controller | |
| Maximum Sink Current | 130μA | |
| Supply Current | 600μA | |
| Mount Type | PCB | |
| Package Type | SOP-J8 | |
| Minimum Supply Voltage | 12V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 38V | |
| Minimum Operating Temperature | -40°C | |
| Series | BD7695FJ | |
| Standards/Approvals | RoHS | |
| Length | 6mm | |
| Height | 1.65mm | |
| Maximum Operating Temperature | 105°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ROHM | ||
Product Type Power Factor Correction IC | ||
Start-up Supply Current 60μA | ||
Maximum Source Current 130μA | ||
Sub Type Controller | ||
Maximum Sink Current 130μA | ||
Supply Current 600μA | ||
Mount Type PCB | ||
Package Type SOP-J8 | ||
Minimum Supply Voltage 12V | ||
Pin Count 8 | ||
Maximum Supply Voltage 38V | ||
Minimum Operating Temperature -40°C | ||
Series BD7695FJ | ||
Standards/Approvals RoHS | ||
Length 6mm | ||
Height 1.65mm | ||
Maximum Operating Temperature 105°C | ||
Automotive Standard No | ||
The ROHM power factor correction IC is suitable for AC or DC supply, also for all products needing power factor improvement. The PFC adopts boundary conduction mode and switching loss reduction and noise reduction are possible by zero current detection. This IC incorporates a circuit for reducing total harmonics distortion and can support IEC61000-3-2 Class-C.
Low power consumption
VCC UVLO function
Static OVP by the vs pin error amplifier input short protection
Stable MOSFET gate drive soft start