onsemi, Power Factor Controller IC 130 kHz 16-Pin, SOIC 30 V
- N° de stock RS:
- 230-9062P
- Référence fabricant:
- NCP1680AAD1R2G
- Fabricant:
- onsemi
Offre groupée disponible
Sous-total 20 unités (conditionné en bande continue)*
68,20 €
(TVA exclue)
82,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Dernier stock RS
- 2 482 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 20 - 198 | 3,41 € |
| 200 - 998 | 2,96 € |
| 1000 + | 2,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 230-9062P
- Référence fabricant:
- NCP1680AAD1R2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Power Factor Controller IC | |
| Sub Type | Power Factor Controller | |
| Maximum Source Current | 500mA | |
| Switching Frequency | 130kHz | |
| Maximum Sink Current | 800mA | |
| Supply Current | 4mA | |
| Zero Power Detection | No | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 16 | |
| Minimum Supply Voltage | 9.5V | |
| Maximum Supply Voltage | 30V | |
| Minimum Operating Temperature | -40°C | |
| Length | 5mm | |
| Series | NCP1680A | |
| Standards/Approvals | No | |
| Height | 1.75mm | |
| Width | 4 mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Power Factor Controller IC | ||
Sub Type Power Factor Controller | ||
Maximum Source Current 500mA | ||
Switching Frequency 130kHz | ||
Maximum Sink Current 800mA | ||
Supply Current 4mA | ||
Zero Power Detection No | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 16 | ||
Minimum Supply Voltage 9.5V | ||
Maximum Supply Voltage 30V | ||
Minimum Operating Temperature -40°C | ||
Length 5mm | ||
Series NCP1680A | ||
Standards/Approvals No | ||
Height 1.75mm | ||
Width 4 mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor series NCP1680 is a CRM PFC controller IC designed to drive the bridgeless totem-pole PFC topology. The bridgeless totem-pole PFC is a power factor correction architecture that consists of a fast switching leg driven at the PWM switching frequency and a second leg that operates at the AC line frequency. This topology eliminates the diode bridge present at the input of a conventional PFC circuit, allowing significant improvement in the power stage efficiency.
Totem Pole PFC Topology Eliminates Input Diode Bridge
Critical Conduction Mode (CRM) Operation
Discontinuous Conduction Mode (DCM) with Valley Turn On Under Light Load Condition
Frequency Fold back in DCM With 25 kHz Minimum Frequency
Skip Mode in Very Light Load Condition
Proprietary Current Sense Scheme
Digital Voltage Loop Compensation