Prysmian BS6724 Afumex, 50 m 4 Core Power Cable, Black PEX 90 °C

Visuel non contractuel

Sous-total (1 bobine de 50 unités)*

1 223,43 €

(TVA exclue)

1 480,35 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 1 unité(s) expédiée(s) à partir du 23 février 2026
  • Plus 1 unité(s) expédiée(s) à partir du 03 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s)
la bobine
Prix par unité*
1 +1 223,43 €24,469 €

*Prix donné à titre indicatif

N° de stock RS:
494-5834
Référence fabricant:
20147071
Fabricant:
Prysmian
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Prysmian

Product Type

Power Cable

Number of Cores

4

Jacket Colour

Black

Cable Length

50m

Jacket Material

PEX

Outside Diameter

22.3 mm

Voltage

1 kV

Conductor Type

Stranded

Minimum Operating Temperature

-25°C

Cable CSA

16 mm²

Standards/Approvals

BS 6724, BS EN 50266-2, BS EN 50267-2-1, BS EN 50267-2-3, BS EN 60332-1-2

Series

BS6724 Afumex

Conductor Material

Annealed Copper

Fire Behaviour

Halogen Free, Low Smoke Zero Halogen (LSZH)

Maximum Operating Temperature

90°C

Pays d'origine :
GB

Afumex BS6724 LSZH Armoured Cable


Brought to you by Prysmian, this series of Afuxmex 90 steel wire armoured cable is an excellent choice for harsh environments. Designed for supply leads for medium duty domestic and office appliances, the choice doesn't end there. As a hard-wearing and durable SWA cable is essential for many applications. An excellent resistance to ignition and flame conforms to health and safety standards, due to the very low levels of smoke which would be produced. All models are highly reliable and excellent quality.

Features and Benefits


• BASEC Approved

• Stranded annealed copper to BS EN 60228

• Low smoke to BS7622

• Temperature rating: -15 to +90°C

• Halogen free, BS EN 50267-2-1, BS EN 50267-2-3

What is Steel Wire Armoured Cable?


Steel wire armoured cable (SWA) is a highly reinforced power cable. It will supply a continuous flow of electricity to the intended target, due the galvanized steel overlapping the center cable. Each cable is built up of numerous copper cores, followed by XLPE insulation of the cores. The insulated cores are then protected by a layer of PVC bedding, which is secured by steel wire. Finally a thick outer layer of PVC covers the entirety of the cable.

When would this armoured cable be required?


The best use of this cable would be if the intended application is likely to be on a rough surface, or is situated in areas where there is high traffic and risk of debris striking the power cable. This would be the most beneficial. As an example, some of the applications for using SWA cable include:

• Busy offices and warehouses

• Indoor and outdoor power stations

• High risk workshops

Standards

BS6724

Liens connexes

Recently viewed