Festo Pneumatic Soft Start Valve, 4300 L/min 1/2 in G 10 bar

Voir la catégorie

Sous-total (1 unité)*

1 228,24 €

(TVA exclue)

1 486,17 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 4 unité(s) expédiée(s) à partir du 27 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +1 228,24 €

*Prix donné à titre indicatif

N° de stock RS:
343-668
Référence fabricant:
MS6-SV-1/2-E-10V24-SO-AG-MP1
Fabricant:
Festo
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Festo

Product Type

Pneumatic Soft Start Valve

Series

MS

Sub Type

Soft Start or Quick Exhaust Valve

Inlet Connection Size

1/2 in G

Flow Rate

4300L/min

Minimum Operating Pressure

10bar

Maximum Operating Pressure

10 bar

Material

Die Cast Aluminium

Standards/Approvals

UKCA, VDMA24364-B1/B2-L, DIN EN ISO 13849-1, CE, RoHS

Pays d'origine :
HU

Festo MS Pneumatic Soft Start Valve, 4300L/min Flow Rate, 1/2 inches Inlet Connection Size - MS6-SV-1/2-E-10V24-SO-AG-MP1, Numeric Part Number:548715


This pneumatic soft-start valve is designed to control the initial pressure and flow in compressed-air systems, reducing shock loads during actuator start-up. It is intended for industrial automation environments where controlled ramp-up and exhaust behaviour improve system stability and component life. The valve is MADE from die-cast aluminium and connects to 1/2in G supply lines, operating within typical workshop temperature ranges.

Features and Benefits:


• 4300 L/min flow rate for high-volume Air handling
• 10 bar maximum operating pressure for robust system integration
• Minimum operating pressure 3.5 bar ensures reliable actuation
• Operates between −10°C and +50°C for standard industrial climates
• Conforms to DIN EN ISO 13849-1 for safety-related applications

Applications


• Suitable for soft-start control of pneumatic cylinders in assembly lines
• Ideal for reducing inrush loads on air-driven conveyors
• Used for controlled venting in pneumatic test rigs
• Can be used for sequencing valves in packaging machinery

What inlet connection will fit existing 1/2in G pipework?


The valve accepts a 1/2in G threaded inlet compatible with standard G‑thread fittings used in UK pneumatic installations.

How does the device behave at low supply pressure?


It requires a minimum supply of 3.5 bar for correct soft-start function

below this the valve may not provide controlled ramp-up.

What materials should be expected where the valve is mounted?


The body is manufactured from die-cast aluminium, offering a balance of strength and reduced mass for typical mounting brackets.

Which approvals indicate suitability for industrial safety environments?


It meets standards including DIN EN ISO 13849-1 and carries CE and UKCA markings for market conformity.

Liens connexes