SMC 8.33 L/s 1 mm Pneumatic Separator, 5 μm filtration, 0.1 MPa to 10 bar
- N° de stock RS:
- 254-8129
- Référence fabricant:
- AMJ5000-F10
- Fabricant:
- SMC
Sous-total (1 unité)*
215,70 €
(TVA exclue)
261,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 16 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 215,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 254-8129
- Référence fabricant:
- AMJ5000-F10
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Port Size | 1 mm | |
| Product Type | Pneumatic Separator | |
| Sub Type | Drain Separator for Vacuum | |
| Maximum Flow Rate | 8.33L/s | |
| Connection Thread Standard | G | |
| Filtration Size | 5μm | |
| Series | AMJ | |
| Maximum Operating Pressure | 10 bar | |
| Minimum Operating Temperature | 5°C | |
| Maximum Operating Temperature | 60°C | |
| Minimum Operating Pressure | 0.1MPa | |
| Overall Width | 90mm | |
| Overall Height | 284mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Port Size 1 mm | ||
Product Type Pneumatic Separator | ||
Sub Type Drain Separator for Vacuum | ||
Maximum Flow Rate 8.33L/s | ||
Connection Thread Standard G | ||
Filtration Size 5μm | ||
Series AMJ | ||
Maximum Operating Pressure 10 bar | ||
Minimum Operating Temperature 5°C | ||
Maximum Operating Temperature 60°C | ||
Minimum Operating Pressure 0.1MPa | ||
Overall Width 90mm | ||
Overall Height 284mm | ||
Standards/Approvals No | ||
- Pays d'origine :
- JP
The SMC drain separator is effective for removing water droplets from the air sucked into vacuum pumps and ejectors. Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it po
No drop in pressure
Liens connexes
- SMC 8.33 L/s 3/8 in Pneumatic Separator 0.1 MPa to 10 bar
- SMC 8.33 L/s 3/4 in Pneumatic Separator, -1 bar to 15 bar
- SMC 8.33 L/s 3/8 in Pneumatic Separator 0.5 bar to 10 bar
- SMC 200 L/s 2 mm Pneumatic Separator 0.1 MPa to 10 bar
- SMC 100 L/s 1.5 mm Pneumatic Separator 0.1 MPa to 10 bar
- SMC 61.66 L/s 3/4 in Pneumatic Separator 0.1 MPa to 10 bar
- SMC 36.66 L/s 3/4 in Pneumatic Separator 0.1 MPa to 10 bar
- SMC 36.66 L/s 1/2 in Pneumatic Separator 0.1 MPa to 10 bar