SMC 3.33 L/s 1/4 in Pneumatic Separator, 0.01 μm filtration, 0.5 bar to 10 bar
- N° de stock RS:
- 254-8082
- Référence fabricant:
- AME150C-F02
- Fabricant:
- SMC
Sous-total (1 unité)*
58,47 €
(TVA exclue)
70,75 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 11 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 58,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 254-8082
- Référence fabricant:
- AME150C-F02
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Port Size | 1/4 in | |
| Product Type | Pneumatic Separator | |
| Sub Type | Mist Separator | |
| Maximum Flow Rate | 3.33L/s | |
| Filtration Size | 0.01μm | |
| Connection Thread Standard | G | |
| Series | AME | |
| Maximum Operating Pressure | 10 bar | |
| Minimum Operating Temperature | 5°C | |
| Minimum Operating Pressure | 0.5bar | |
| Maximum Operating Temperature | 60°C | |
| Overall Height | 83mm | |
| Standards/Approvals | No | |
| Overall Width | 63mm | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Port Size 1/4 in | ||
Product Type Pneumatic Separator | ||
Sub Type Mist Separator | ||
Maximum Flow Rate 3.33L/s | ||
Filtration Size 0.01μm | ||
Connection Thread Standard G | ||
Series AME | ||
Maximum Operating Pressure 10 bar | ||
Minimum Operating Temperature 5°C | ||
Minimum Operating Pressure 0.5bar | ||
Maximum Operating Temperature 60°C | ||
Overall Height 83mm | ||
Standards/Approvals No | ||
Overall Width 63mm | ||
- Pays d'origine :
- JP
The SMC water separator can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element that is exclusively used for removing water droplet
Max. operating pressure 1.0 Map
Glass fibre material
Liens connexes
- SMC 3.33 L/s 1/8 in Mist Separator 0.05 MPa to 1 Mpa
- SMC 3.33 L/s 1/4 in Pneumatic Separator 0.5 bar to 10 bar
- SMC 3700 L/min 1/4 in G Pneumatic Separator 0.5 bar to 10 bar
- SMC 500 L/min 1/4 in G Pneumatic Separator 0.5 bar to 10 bar
- SMC 3700 L/min Pneumatic Separator 0.5 bar to 10 bar
- SMC 61.66 L/s 1 mm Pneumatic Separator 0.5 bar to 10 bar
- SMC G 3/8 Mist Separator 0.5 bar to 10 bar
- SMC 16.66 L/s 1/2 in Pneumatic Separator 0.5 bar to 10 bar