SMC 200L/s Rc 3/8 Pneumatic Separator, 1 bar to 1 Mpa
- N° de stock RS:
- 234-4163
- Référence fabricant:
- AMJ4000-F03
- Fabricant:
- SMC
Sous-total (1 unité)*
157,33 €
(TVA exclue)
190,37 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 03 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 157,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 234-4163
- Référence fabricant:
- AMJ4000-F03
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Port Size | Rc 3/8 | |
| Product Type | Pneumatic Separator | |
| Maximum Flow Rate | 200L/s | |
| Connection Thread Standard | Rc | |
| Series | AMJ | |
| Seal Material | Nitrile Rubber (NBR) | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | 5°C | |
| Maximum Operating Temperature | 60°C | |
| Minimum Operating Pressure | 1bar | |
| Overall Height | 53mm | |
| Standards/Approvals | No | |
| Overall Width | 53mm | |
| Bowl Material | Polycarbonate | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Port Size Rc 3/8 | ||
Product Type Pneumatic Separator | ||
Maximum Flow Rate 200L/s | ||
Connection Thread Standard Rc | ||
Series AMJ | ||
Seal Material Nitrile Rubber (NBR) | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature 5°C | ||
Maximum Operating Temperature 60°C | ||
Minimum Operating Pressure 1bar | ||
Overall Height 53mm | ||
Standards/Approvals No | ||
Overall Width 53mm | ||
Bowl Material Polycarbonate | ||
- Pays d'origine :
- JP
The SMC series AMJ is effective for removing water droplets from the air sucked into vacuum pumps and ejectors. Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum.
Removes water droplets from air by simply installing in vacuum lines
Prevents malfunction of vacuum pumps and ejectors
Over 90% of water droplets can be removed using a dedicated element
Liens connexes
- SMC 200L/s Rc 3/8 Pneumatic Separator, 1 bar to 1 Mpa
- SMC 200L/min Pneumatic Separator, 0.1 MPa to 1 Mpa
- SMC 200L/s G 1/4 Mist Separator, 0.05 MPa to 1 Mpa
- SMC 300 L/min G 1/2 Pneumatic Separator, 0.1 MPa to 100 bar
- SMC 200L/min G 1/4 Mist Separator 0.05 MPa to 10 bar
- SMC 200L/min G 1/4 Pneumatic Separator, -750 mmHg to 1 Mpa
- SMC 200 L/min Rc 1/4 Pneumatic Separator, 1 MPa to 1 Mpa
- SMC G 3/8 Water Separator, 0.05 MPa to 1 Mpa