SMC 3.33 L/s 1/8 in Mist Separator, 0.01 μm filtration, 0.05 MPa to 1 Mpa
- N° de stock RS:
- 232-8621
- Référence fabricant:
- AME150C-F01
- Fabricant:
- SMC
Sous-total (1 unité)*
58,47 €
(TVA exclue)
70,75 €
(TVA incluse)
Ajouter 2 unités pour bénéficier d'une livraison gratuite
En stock
- 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 58,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 232-8621
- Référence fabricant:
- AME150C-F01
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Product Type | Mist Separator | |
| Port Size | 1/8 in | |
| Maximum Flow Rate | 3.33L/s | |
| Sub Type | Mist Separator | |
| Filtration Size | 0.01μm | |
| Series | AME | |
| Seal Material | Nitrile Rubber (NBR) | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 60°C | |
| Minimum Operating Pressure | 0.05MPa | |
| Standards/Approvals | No | |
| Overall Width | 90mm | |
| Overall Height | 204mm | |
| Bowl Material | Polycarbonate | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Product Type Mist Separator | ||
Port Size 1/8 in | ||
Maximum Flow Rate 3.33L/s | ||
Sub Type Mist Separator | ||
Filtration Size 0.01μm | ||
Series AME | ||
Seal Material Nitrile Rubber (NBR) | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 60°C | ||
Minimum Operating Pressure 0.05MPa | ||
Standards/Approvals No | ||
Overall Width 90mm | ||
Overall Height 204mm | ||
Bowl Material Polycarbonate | ||
- Pays d'origine :
- JP
The SMC AME series separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oil-free equivalent air. It should be applied for filtration of compressed air requiring high cleanliness for coating lines, compressed air for clean rooms and compressed air for equipment necessary to avoid oils
Indicates the filter element life by a colour change
Nominal filtration rating 0.01 μm
Maximum 0.01 mg/m3 oil mist density at outlet
Liens connexes
- SMC 8.3 l/sec. G 1/4 Mist Separator, 0.01μm filtration
- SMC 120 l/sec. G 1/4 Mist Separator, 0.01μm filtration
- SMC 300 l/sec. G 1/8 Mist Separator, 0.03μm filtration
- SMC 3.33 l/sec. G 1/4 Pneumatic Separator, 0.3μm filtration
- SMC 3.33 l/sec. G 3/4 Pneumatic Separator, 0.3μm filtration
- SMC 5.5 l/sec. G 1/4 Mist Separator, 0.3μm filtration
- SMC 120 L/min G 1/8 Mist Separator 0.05MPa to 1 MPa, 1.5 MPa
- SMC 200 l/min G 1/8 Pneumatic Separator 0.5bar to 10 bar