Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	SMC
	Port Size	3/8 in
	Product Type	Regulator
	Connection Thread Standard	G
	Series	AR30-D
	Maximum Flow Rate	5000L/min
	Maximum Operating Pressure	10 bar
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	RoHS
	Pressure Setting Range	0.05 to 0.85 MPa

	Sélectionner tout
	Marque SMC
	Port Size 3/8 in
	Product Type Regulator
	Connection Thread Standard G
	Series AR30-D
	Maximum Flow Rate 5000L/min
	Maximum Operating Pressure 10 bar
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 60°C
	Standards/Approvals RoHS
	Pressure Setting Range 0.05 to 0.85 MPa

SMC AR30-D Series Regulator, 5000L/min Maximum Flow Rate, 0.05 to 0.85MPa Pressure Setting Range - AR30-F03E-D

This regulator controls compressed Air pressure in pneumatic systems, providing adjustable outlet pressure for automation and mechanical applications. It is intended for use where a relieving-type regulator with a downward knob and left-to-right flow is required, and incorporates a square embedded pressure gauge with a limit indicator option to assist monitoring.

Features & Benefits

• Pressure adjustment range 0.05 to 0.85 MPa enabling precise control
• Relieving exhaust mechanism prevents downstream overpressure
• Maximum operating pressure 1.0 MPa supports robust system demands
• Port connection G thread 3/8 in for widely used pneumatic tubing
• Rated for Air temperatures -5 to 60 °C for varied ambient conditions

Applications

• Suitable for controlling feed pressure to pneumatic actuators
• Ideal for pressure regulation in factory automation lines
• used with Air-driven valves and solenoids in assembly equipment
• Suitable for compressed Air preparation stations in workshops

What is the maximum continuous flow expected through this device?

The product can accommodate high flow volumes, with a typical maximum flow rate rated at 5000 L/min for this body size under standard test conditions.

How does the pressure gauge option assist in system setup?

The embedded square gauge with limit indicator provides a Visual setpoint reference at the regulator, simplifying commissioning and aiding Rapid adjustment without separate instrumentation.

What are the pressure endurance limits for intermittent overloads?

Proof pressure is specified at 1.5 MPa, defining the upper transient tolerance beyond the normal operating pressure.

SMC 3/8 in Regulator - 10 bar 5000L/min, G AR30-D

Frais de livraison offerts pour toute commande de plus de 90,00 €