Festo MS Series Pneumatic Regulator G 1/4 Female
- N° de stock RS:
- 121-5659
- Numéro d'article Distrelec:
- 301-68-992
- Référence fabricant:
- MS4-LR-1/4-D6-AS
- Fabricant:
- Festo
Offre groupée disponible
Sous-total (1 unité)*
45,04 €
(TVA exclue)
54,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 104 unité(s) prête(s) à être expédiée(s)
- Plus 66 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 45,04 € |
| 5 - 9 | 43,24 € |
| 10 + | 41,44 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 121-5659
- Numéro d'article Distrelec:
- 301-68-992
- Référence fabricant:
- MS4-LR-1/4-D6-AS
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | Pneumatic Regulator | |
| Inlet Connection Type | Female | |
| Outlet Connection Type | Female | |
| Inlet Connection Size | G 1/4 | |
| Series | MS | |
| Inlet Port Gender | Female | |
| Maximum Operating Pressure | 20 bar | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | ATEX category gas II 2G, cULus recognised (OL), ISO 8573-1:2010 (7:4:4), ATEX category dust II 2D, CE mark to EU Explosion Protection Directive (ATEX), RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type Pneumatic Regulator | ||
Inlet Connection Type Female | ||
Outlet Connection Type Female | ||
Inlet Connection Size G 1/4 | ||
Series MS | ||
Inlet Port Gender Female | ||
Maximum Operating Pressure 20 bar | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals ATEX category gas II 2G, cULus recognised (OL), ISO 8573-1:2010 (7:4:4), ATEX category dust II 2D, CE mark to EU Explosion Protection Directive (ATEX), RoHS | ||
- Pays d'origine :
- HU
Festo Pneumatic Regulator, G1/4 Port Connection, 7 Bar Maximum Input Pressure - MS4-LR-1/4-D6-AS
Are you in need of a way to maintain the output air pressure of your pneumatic compressor? This Festo pneumatic regulator automatically shuts off the airflow when the set pressure is reached to keep it at the correct level for your setup. It has a G1/4 threaded end that tightens in place so the connected pipe remains secure, even in vibrating systems. With an operating temperature range between -10°C and +60°C, this regulator is suitable for use in harsh industrial environments.
• Up to 7 bar input pressure for receiving air from low-pressure systems
• Typical flow rate of 1800L/min (litres per minute), ensuring your equipment has maximum flow capability
• Suitable for front panel mounting or in-line installation for versatile setup options
Applications
• Heating furnaces
• Gas grills
• Medical respirators
• Dental equipment
What's this pneumatic regulator made of?
This pneumatic regulator has a die-cast aluminium housing material to prevent corrosion wear. Its seals are made from NBR (nitrile rubber) to insulate the regulator against leaks. The control panel is made from PA and POM (polyoxymethylene), which have high-tensile strength and remain rigid under pressure.
Liens connexes
- Festo MS Series Pneumatic Regulator G 1/4 Pneumatic G
- Festo MS Series Pneumatic Regulator G 1/8 G
- Festo MS Series Pneumatic Regulator G 1/4 G 1/4 G
- Festo MS Series Pneumatic Regulator G 1/8 Female
- Festo MS Series Pressure Regulator G 1/4
- Festo MS Series Pneumatic Regulator G 1/4 G G
- Festo MS Series Pneumatic Regulator G 1/4 G
- Festo MS Series Pneumatic Regulator G 1/4 Female