SMC Pneumatic Air Lubricator 1 MPa, AL-D Series
- N° de stock RS:
- 255-3276
- Référence fabricant:
- AL20-F02-D
- Fabricant:
- SMC
Sous-total (1 unité)*
32,86 €
(TVA exclue)
39,76 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s)
- Plus 24 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 32,86 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 255-3276
- Référence fabricant:
- AL20-F02-D
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Product Type | Pneumatic Air Lubricator | |
| Series | AL-D | |
| Connection Thread Standard | G | |
| Oil Capacity | 25cm³ | |
| Maximum Operating Pressure | 1 MPa | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 60°C | |
| Overall Height | 115mm | |
| Overall Width | 40mm | |
| Standards/Approvals | No | |
| Bowl Material | Polycarbonate | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Product Type Pneumatic Air Lubricator | ||
Series AL-D | ||
Connection Thread Standard G | ||
Oil Capacity 25cm³ | ||
Maximum Operating Pressure 1 MPa | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 60°C | ||
Overall Height 115mm | ||
Overall Width 40mm | ||
Standards/Approvals No | ||
Bowl Material Polycarbonate | ||
- Pays d'origine :
- CN
SMC AL-D Series Pneumatic Air Lubricator, 25cm³ Oil Capacity, 1MPa Maximum Operating Pressure - AL20-F02-D
This pneumatic air lubricator provides metered lubrication for compressed-air systems, delivering controlled oil to pneumatic components to reduce wear and maintain performance. Designed for industrial use with air as the pressure medium, it operates across a broad temperature range and is intended for inline installation using standard G-thread connections.
Features and Benefits:
• Oil reservoir 25cm³ provides compact, refillable lubrication capacity
• Operational range -5°C to 60°C permits varied ambient and process conditions
• Maximum operating pressure 1MPa supports high-pressure pneumatic lines
• Minimum operating pressure 0.05MPa ensures function at low supply pressure
• Polycarbonate bowl offers visual oil-level checking with corrosion resistance
• Max flow rate 4000 l/min at 1.0MPa enables use on moderate-flow systems
• Operational range -5°C to 60°C permits varied ambient and process conditions
• Maximum operating pressure 1MPa supports high-pressure pneumatic lines
• Minimum operating pressure 0.05MPa ensures function at low supply pressure
• Polycarbonate bowl offers visual oil-level checking with corrosion resistance
• Max flow rate 4000 l/min at 1.0MPa enables use on moderate-flow systems
Applications
• Suitable for lubricating actuator and valve assemblies in workshops
• Ideal for use with compressed-air distribution mains in factories
• Used for maintaining tooling in pneumatic production cells
• Can be used for retrofitting existing G-thread pneumatic lines
• Applicable where compact components are needed in restricted panels
• Ideal for use with compressed-air distribution mains in factories
• Used for maintaining tooling in pneumatic production cells
• Can be used for retrofitting existing G-thread pneumatic lines
• Applicable where compact components are needed in restricted panels
What lubricant type is recommended for best performance?
Class 1 turbine oil with ISO VG32 viscosity is specified for optimal droplet formation and consistent supply.
How low can the inlet flow be while still delivering droplets?
The unit requires a minimum dripping flow of 15 l/min to maintain effective lubrication.
What is the proof pressure rating for safety checks?
The component withstands a proof pressure of 1.5MPa for pressure testing.
What materials are used for the bowl and external flow indications?
The sight bowl is polycarbonate, providing transparency for visual level monitoring and an exhaust/flow-direction port.
Liens connexes
- SMC 1/4 in Air Lubricator 1 MPa, AL20 Series
- SMC 1/4 in Pneumatic Air Lubricator 1.5 Mpa, AL Series
- SMC 1/4 in Air Lubricator 1 MPa, AC Series
- SMC Pneumatic Air Lubricator 10 bar, AL-D Series
- SMC 1/2 in Pneumatic Air Lubricator 1 MPa, AL-D Series
- SMC 1/8 in Pneumatic Lubricator 1 Mpa, AL20 Series
- SMC G 1/2 Pneumatic Air Lubricator 1 MPa AL Series
- SMC 3/8 in Pneumatic Air Lubricator 1.5 Mpa, AL Series