Festo 1/2 in G Pneumatic Air Lubricator 16 bar, MS Series
- N° de stock RS:
- 202-3189
- Référence fabricant:
- MS6-LOE-1/2-R
- Fabricant:
- Festo
Sous-total (1 unité)*
61,22 €
(TVA exclue)
74,08 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 27 unité(s) prête(s) à être expédiée(s)
- Plus 12 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 61,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 202-3189
- Référence fabricant:
- MS6-LOE-1/2-R
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | Pneumatic Air Lubricator | |
| Port Size | 1/2 in G | |
| Series | MS | |
| Connection Thread Standard | G | |
| Oil Capacity | 75cm³ | |
| Maximum Operating Pressure | 16 bar | |
| Minimum Operating Temperature | -10°C | |
| Oil Feed Type | Mist | |
| Drain | Yes | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | RoHS | |
| Overall Width | 62mm | |
| Overall Height | 218mm | |
| Bowl Material | Plastic | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type Pneumatic Air Lubricator | ||
Port Size 1/2 in G | ||
Series MS | ||
Connection Thread Standard G | ||
Oil Capacity 75cm³ | ||
Maximum Operating Pressure 16 bar | ||
Minimum Operating Temperature -10°C | ||
Oil Feed Type Mist | ||
Drain Yes | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals RoHS | ||
Overall Width 62mm | ||
Overall Height 218mm | ||
Bowl Material Plastic | ||
- Pays d'origine :
- HU
Festo Pneumatic Air Lubricator, 75cm³ Maximum Oil Capacity, 1 to 16 Bar Operating Pressure Range - MS6-LOE-1/2-R
For glitch-free flow in your pneumatic system, smooth the way with this air lubricator from Festo. It adds oil evenly to your medium to minimise friction and boost efficiency. As it supports flow rates up to 7,200L/min, you can trust the unit to keep up with fast-moving applications. Simple inline installation lets you install it without dismantling your entire setup. Don't worry about the lubricator running dry, as its 75cm³ oil capacity minimises the need for refills.
Features & Benefits
• Die-cast aluminium housing resists corrosion to keep compressed air contaminant-free
• Transparent bowl window for handy checks on the oil level
• Tolerates vertical mounting angles up to 5°, for flexible installation
• Regulation G1/2-thread connection to work with standard pneumatic hardware
Applications
• Mining equipment
• Metalworking
• Heavy engineering
What minimum flow rate does this lubricator need?
This unit starts releasing lubricant at a rate of 50L/min, so you can trust it to do its job even in low-flow conditions.
How do I know when I should refill this device?
The product comes with a low-oil marking line, so it's easy to see if it needs more lubricant.
Liens connexes
- Festo 1/4 in G Pneumatic Lubricator 16 bar, MS Series
- Festo 1/4 in G Pneumatic Air Lubricator 12 bar, MS Series
- Festo 1/2 in G Pneumatic Lubricator 16 bar, MS Series
- Festo 3/8 in G Pneumatic Lubricator 16 bar, MS Series
- Festo Pneumatic Air Lubricator 16 bar, MS Series
- Festo Air Filter Regulator Lubricator 16 bar, MS Series
- Festo 1/2 in G Pneumatic Lubricator 16 bar, M Series
- Festo 1/2 in G Pneumatic Air Lubricator 16 bar, LOE-D Series