SMC ASP Series Speed Controller Flow Regulator, 1/4 in R R 1/4 in One-touch Fitting 8 mm
- N° de stock RS:
- 494-3377
- Référence fabricant:
- ASP430F-02-08S
- Fabricant:
- SMC
Visuel non contractuel
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
45,60 €
(TVA exclue)
55,18 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 22 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 45,60 € |
| 5 - 9 | 44,22 € |
| 10 + | 42,79 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 494-3377
- Référence fabricant:
- ASP430F-02-08S
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Inlet Connection Type | 1/4 in R | |
| Product Type | Flow Regulator | |
| Outlet Connection Type | One-touch Fitting | |
| Sub Type | Speed Controller | |
| Inlet Connection Size | 1/4 in | |
| Outlet Connection Size | 8 mm | |
| Series | ASP | |
| Inlet Thread Standard | R | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | -5°C | |
| Material | Brass, Polybutylene Terephthalate, POM, Nitrile Rubber (NBR), Stainless Steel | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Minimum Operating Pressure | 0.1MPa | |
| Proof Pressure | 1.5MPa | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Inlet Connection Type 1/4 in R | ||
Product Type Flow Regulator | ||
Outlet Connection Type One-touch Fitting | ||
Sub Type Speed Controller | ||
Inlet Connection Size 1/4 in | ||
Outlet Connection Size 8 mm | ||
Series ASP | ||
Inlet Thread Standard R | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature -5°C | ||
Material Brass, Polybutylene Terephthalate, POM, Nitrile Rubber (NBR), Stainless Steel | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Minimum Operating Pressure 0.1MPa | ||
Proof Pressure 1.5MPa | ||
Statut RoHS : Exempté
- Pays d'origine :
- FR
SMC ASP Series Flow Regulator, 1/4 inches Inlet Connection size, 8mm Outlet Connection size - ASP430F-02-08S
This flow regulator is a pneumatic speed controller designed to control Airflow in industrial systems. It connects to a 1/4 inches R inlet and discharges via an 8mm one‑touch fitting, providing adjustable flow control for Air lines operating within typical workshop and factory conditions.
Features & Benefits
• Operates across a working pressure range 0.1–1 MPa for flexible control
• Maximum temperature rating 60°C enables use in warm environments
• Proof pressure 1.5 MPa provides margin against pressure spikes
• Brass and stainless steel parts resist wear in pneumatic circuits
• Elastomer and polymer Seals ensure consistent modulation and sealing
• Maximum temperature rating 60°C enables use in warm environments
• Proof pressure 1.5 MPa provides margin against pressure spikes
• Brass and stainless steel parts resist wear in pneumatic circuits
• Elastomer and polymer Seals ensure consistent modulation and sealing
**Applications**
• Suitable for speed regulation of pneumatic actuators in automation systems
• Ideal for controlling Airflow to valves in electrical panel ventilation
• Used with compressed Air lines in mechanical assembly stations
• Can be used for damping motion in electronic test rigs
• Ideal for controlling Airflow to valves in electrical panel ventilation
• Used with compressed Air lines in mechanical assembly stations
• Can be used for damping motion in electronic test rigs
What connection types are provided for straightforward installation?
The unit accepts a 1/4 inch R threaded inlet and an 8mm one‑touch outlet for Rapid tubing connection without additional fittings.
Which materials contact the medium and affect durability?
Flow path components include brass, stainless steel, POM and polybutylene terephthalate with NBR seals, combining metals and polymers for balanced wear resistance.
What operating temperatures and pressures should I expect during use?
Normal operation is suitable between -5°C and 60°C and within 0.1–1 MPa
transient conditions up to 1.5 MPa are covered by the proof pressure.
Is this regulator intended for hazardous-area installations?
It is not certified for hazardous‑area use and should be installed only in appropriate non‑hazardous locations.
Note
Use caution with soft nylon or polyurethane at maximum pressure.
Liens connexes
- SMC ASP Series Speed Controller Speed Controller 1/4 in R R 1/4 in One-touch Fitting 8 mm
- SMC ASP Series Speed Controller Flow Regulator, 1/8 in R R 1/8 in One-touch Fitting 8 mm
- SMC ASP Series Speed Controller Speed Controller, 1/4 in R R 1/4 in One-touch Fitting 6 mm
- SMC ASP Series Flow Controller Flow Regulator R
- SMC ASP Series Speed Controller Speed Controller, 3/8 in R R 3/8 in One-touch Fitting 8 mm
- SMC ASP Series Speed Controller Flow Regulator, 3/8 in R R 3/8 in One-touch Fitting 10 mm
- SMC ASP Series Flow Controller Flow Regulator, 3/8 in R R 3/8 in
- SMC ASP Series Speed Controller Flow Regulator 1/2 in R R 1/2 in One-touch Fitting 10 mm