Sous-total (1 paquet de 10 unités)*
240,31 €
(TVA exclue)
290,78 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 140 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 + | 24,031 € | 240,31 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 176-1891
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Flow Regulator | |
| Sub Type | Flow Controller | |
| Maximum Operating Pressure | 1 bar | |
| Material | Nickel Plated Brass, Aluminium, 304 Stainless Steel, 301 Stainless Steel, Anodised Aluminium, Stainless Steel, Brass, Polyamide 66, Nitrile Rubber (NBR), Technopolymer, Acetalic Resin | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 80°C | |
| Standards/Approvals | 2014/68/UE, UNI ISO 5598, 1907/2006, PED, 2011/65/CE | |
| Minimum Operating Pressure | 0.1bar | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Flow Regulator | ||
Sub Type Flow Controller | ||
Maximum Operating Pressure 1 bar | ||
Material Nickel Plated Brass, Aluminium, 304 Stainless Steel, 301 Stainless Steel, Anodised Aluminium, Stainless Steel, Brass, Polyamide 66, Nitrile Rubber (NBR), Technopolymer, Acetalic Resin | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 80°C | ||
Standards/Approvals 2014/68/UE, UNI ISO 5598, 1907/2006, PED, 2011/65/CE | ||
Minimum Operating Pressure 0.1bar | ||
Hazardous Area Certification No | ||
- Pays d'origine :
- IT
RS PRO Flow Regulator, Push-in 10 mm Tube Inlet Port x Push-in 10 mm Tube Outlet Port
Use these RS PRO restrictor valves to control the flow of compressed air or fluids in your pneumatic system. You can also use this type of component in garage equipment, production line machinery and water treatment systems. It's simple to increase or decrease the flow in your pneumatic system by adjusting the knob on top of the valve.
These restrictor valves come with two push-in connectors for a simple, leak-free fit and have two moulded screw holes for easy wall mounting. They're suitable for everything from automotive processes to food and beverage production. As these valves are silicone-free, you can use them with fluids such as paints and inks without risk of contamination.
These regulators have a durable body formed of a technopolymer material. Their sleeves, locking nuts and nipples are made of nickel-plated brass for corrosion resistance and low friction. The O-ring and lip-ring seals are built from nitrile butadiene rubber (NBR) that's resistant to oil, water and alcohol, so you can rest assured they'll last.
Features and Benefits
• Maximum outlet pressure of 10 bar
• Minimum outlet pressure of 1 bar
• Push-in 10 mm tube inlet port
• Push-in 10 mm tube outlet port
• Flow controller type
Liens connexes
- Norgren Pneufit C Series Tube In-line Regulator, Push In 10mm Tube Inlet Port x Push In 10mm Tube Outlet Port
- SMC AS Series Tube Flow Controller, 10mm Tube Inlet Port x 10mm Tube Outlet Port
- RS PRO Tube Flow Regulator, Push In 8mm Tube Inlet Port x Push In 8mm Tube Outlet Port
- RS PRO Tube Flow Regulator, Push In 4mm Tube Inlet Port x Push In 4mm Tube Outlet Port
- RS PRO Tube Flow Regulator, Push In 6mm Tube Inlet Port x Push In 6mm Tube Outlet Port
- Legris 7776 Series Tube Flow Regulator, 10mm Tube Inlet Port x 10mm Tube Outlet Port
- Norgren Pneutic C Series Threaded Flow Controller, 10mm Tube Inlet Port x 10mm Tube Outlet Port
- RS PRO 55906 Series Threaded 1/4 in Male Inlet Port, 1/4in Tube Inlet Port x 10mm Tube Outlet Port