SMC AS Series Speed Controller Speed Controller R 1/4 in One-touch Fitting 10 mm
- N° de stock RS:
- 209-985
- Référence fabricant:
- AS2201FG-02-10S
- Fabricant:
- SMC
Visuel non contractuel
Sous-total (1 unité)*
24,32 €
(TVA exclue)
29,43 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 24,32 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 209-985
- Référence fabricant:
- AS2201FG-02-10S
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Outlet Connection Type | One-touch Fitting | |
| Product Type | Speed Controller | |
| Sub Type | Speed Controller | |
| Inlet Connection Size | 1/4 in | |
| Outlet Connection Size | 10 mm | |
| Series | AS | |
| Inlet Thread Standard | R | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | -5°C | |
| Material | Brass, Stainless Steel, Nitrile Rubber (NBR), POM, Polybutylene Terephthalate | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | UL Standard V-0 | |
| Minimum Operating Pressure | 0.1MPa | |
| Hazardous Area Certification | No | |
| Proof Pressure | 1.5MPa | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Outlet Connection Type One-touch Fitting | ||
Product Type Speed Controller | ||
Sub Type Speed Controller | ||
Inlet Connection Size 1/4 in | ||
Outlet Connection Size 10 mm | ||
Series AS | ||
Inlet Thread Standard R | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature -5°C | ||
Material Brass, Stainless Steel, Nitrile Rubber (NBR), POM, Polybutylene Terephthalate | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals UL Standard V-0 | ||
Minimum Operating Pressure 0.1MPa | ||
Hazardous Area Certification No | ||
Proof Pressure 1.5MPa | ||
Statut RoHS : Exempté
- Pays d'origine :
- FR
SMC Series AS Speed Controller, 1/4 inches Inlet Connection size, 10mm Outlet Connection size - AS2201FG-02-10S
This speed controller regulates pneumatic flow to control actuator motion in industrial automation and machine systems. It is constructed from a combination of metals and engineering plastics to suit applications where controlled deceleration or feed-rate adjustment is required. The unit connects into pneumatic lines via a 1/4 in inlet and a simple 10mm one-touch outlet to facilitate quick installation in equipment and production assemblies.
Features & Benefits
• Maximum operating pressure 1 MPa delivers consistent flow control under load
• Proof pressure 1.5 MPa provides margin for system pressure spikes
• Operating temperature range -5 to 60 °C maintains function across typical plant climates
• Construction in brass and stainless steel resists mechanical wear in service
• One-touch 10mm outlet allows Rapid tube connection without additional fittings
• Proof pressure 1.5 MPa provides margin for system pressure spikes
• Operating temperature range -5 to 60 °C maintains function across typical plant climates
• Construction in brass and stainless steel resists mechanical wear in service
• One-touch 10mm outlet allows Rapid tube connection without additional fittings
**Applications**
• Suitable for controlling cylinder speed on assembly lines
• Ideal for integrating into pneumatic tooling and fixtures
• Used with conveyor actuators to regulate motion smoothness
• Can be used for flow adjustment on test benches and rigs
• Ideal for integrating into pneumatic tooling and fixtures
• Used with conveyor actuators to regulate motion smoothness
• Can be used for flow adjustment on test benches and rigs
What sealing materials are used where pressure retention matters?
Nitrile rubber Seals are employed to provide pressure retention and oil resistance at typical plant temperatures.
Which non-metal components contribute to dimensional stability?
POM and polybutylene terephthalate parts are used for internal components that require low friction and stable tolerances.
Is the unit suitable for installations requiring recognised flammability ratings?
The housing materials meet UL V-0 standard for flame retardancy in applicable components.
How does the inlet Interface affect integration with existing tubing?
The 1/4 in inlet is compatible with common quarter-inch pneumatic fittings, allowing straightforward replacement or retrofit.
Liens connexes
- SMC AS Series Speed Controller with One-Touch Fitting Speed Controller, Threaded R(PT) Threaded R (PT)
- SMC AS Series Speed Controller Speed Controller R 1/4 in One-touch Fitting 10 mm
- SMC ASP Series Speed Controller Speed Controller, 1/2 in R R 1/2 in One-touch Fitting 10 mm
- SMC ASP Series Speed Controller Speed Controller, 3/8 in R R 3/8 in One-touch Fitting 10 mm
- SMC AS Series Speed Controller with One-Touch Fitting Speed Controller, Threaded JIS
- SMC AS Series Speed Controller Speed Controller Outlet Female One-touch Fitting 6 mm
- SMC AS Series Speed Controller Speed Controller R 1/8 in One-touch Fitting 4 mm
- SMC ASP Series Speed Controller Flow Regulator, 3/8 in R R 3/8 in One-touch Fitting 10 mm