SMC Brass, Stainless Steel, Polypropylene, Polybutylene Terephthalate Cap for 4 mm
- N° de stock RS:
- 771-4898
- Numéro d'article Distrelec:
- 304-35-932
- Référence fabricant:
- KQ2C04-00A
- Fabricant:
- SMC
Offre groupée disponible
Sous-total (1 paquet de 5 unités)*
7,78 €
(TVA exclue)
9,415 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 180 unité(s) prête(s) à être expédiée(s)
- Plus 70 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 - 20 | 1,556 € | 7,78 € |
| 25 - 45 | 1,51 € | 7,55 € |
| 50 - 120 | 1,47 € | 7,35 € |
| 125 + | 1,432 € | 7,16 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 771-4898
- Numéro d'article Distrelec:
- 304-35-932
- Référence fabricant:
- KQ2C04-00A
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Product Type | Cap | |
| Tube Size | 4 mm | |
| Series | KQ2 | |
| Material | Brass, Stainless Steel, Polypropylene, Polybutylene Terephthalate | |
| Standards/Approvals | RoHS | |
| For Use With | Nylon and Urethane | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Product Type Cap | ||
Tube Size 4 mm | ||
Series KQ2 | ||
Material Brass, Stainless Steel, Polypropylene, Polybutylene Terephthalate | ||
Standards/Approvals RoHS | ||
For Use With Nylon and Urethane | ||
Tubing Cap KQ2C
The KQ2C one-touch tube caps are used to plug unused nylon and polyurethane tubes. The special profile design of these fittings provides positive sealing under pressure. When the tubing cap is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
The special profile design of the seal provides positive sealing under pressure without reduced flow
Release button allows tube to be removed easily without damage
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 to 40°C)
Tube-to-Tube Fittings & Plugs
Sealant coated threads minimise assembly time. The fittings can be used on vacuum or positive pressure lines. Suitable for use with nylon, soft nylon or polyurethane tube for compressed air or water (general industry) conveyance.
Maximum operating pressure 10 bar
Maximum vacuum operating pressure -100kPa
Proof pressure 3MPa
Ambient and fluid temperature -5 to +60°C (water 0 - 40°C)
Note
Models with a -X2 suffix in the Mfr Part No. are copper-free (electroless nickel plated).
Liens connexes
- SMC Brass Polypropylene Nitrile Rubber (NBR) 303 Stainless
- SMC Polybutylene Terephthalate Brass Plug Fitting
- SMC Polypropylene Brass Plug Fitting
- SMC Brass Polypropylene Plug Fitting
- SMC JIS Polypropylene Polybutylene Terephthalate Plug Fitting
- SMC JIS Brass Polybutylene Terephthalate Plug Fitting
- SMC KQ2 Series 304 Stainless Steel Polypropylene POM Nitrile
- SMC KQ2 Series POM 303 Stainless Steel Nitrile Rubber (NBR) 304