SMC AFD series 0.01 μm 3/4 in 10 bar Pneumatic Filter 820L/min max
- N° de stock RS:
- 255-3261
- Référence fabricant:
- AFD40-F06-D
- Fabricant:
- SMC
Sous-total (1 unité)*
88,70 €
(TVA exclue)
107,33 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 21 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 88,70 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 255-3261
- Référence fabricant:
- AFD40-F06-D
- Fabricant:
- SMC
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SMC | |
| Filtration Size | 0.01μm | |
| Product Type | Pneumatic Filter | |
| Port Size | 3/4 in | |
| Connection Thread Standard | G | |
| Series | AFD | |
| Maximum Flow Rate | 820L/min | |
| Maximum Operating Pressure | 10 bar | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Bowl Material | Polycarbonate | |
| Sélectionner tout | ||
|---|---|---|
Marque SMC | ||
Filtration Size 0.01μm | ||
Product Type Pneumatic Filter | ||
Port Size 3/4 in | ||
Connection Thread Standard G | ||
Series AFD | ||
Maximum Flow Rate 820L/min | ||
Maximum Operating Pressure 10 bar | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Bowl Material Polycarbonate | ||
- Pays d'origine :
- CN
SMC AFD Series Pneumatic Filter, 820L/min Maximum Flow Rate, 10 Bar Maximum Operating Pressure - AFD40-F06-D
This pneumatic filter removes liquid mist and fine particulates from compressed Air to protect downstream equipment in industrial automation and electrical control systems. It is designed for inline installation with a G-thread connection and operates across typical workshop temperature ranges, providing continuous separation of contaminants to support pneumatic valves, actuators and instrumentation.
Features & Benefits
• 0.01μm nominal filtration delivering high-efficiency particle removal
• Handles flow rates up to 820 L/min for high-capacity systems
• Maximum operating pressure 10 bar to suit robust pneumatic networks
• Polycarbonate bowl offers Visual fluid monitoring without dismantling
• Operates from -5°C to +60°C for standard ambient environments
• Handles flow rates up to 820 L/min for high-capacity systems
• Maximum operating pressure 10 bar to suit robust pneumatic networks
• Polycarbonate bowl offers Visual fluid monitoring without dismantling
• Operates from -5°C to +60°C for standard ambient environments
Applications
• Suitable for preparation of Air for precision pneumatic actuators
• Ideal for protecting solenoid valves in automation panels
• used with compressed Air instrumentation to prevent sensor fouling
• Can be used for Air supply to pick-and-place and dosing equipment
• Ideal for protecting solenoid valves in automation panels
• used with compressed Air instrumentation to prevent sensor fouling
• Can be used for Air supply to pick-and-place and dosing equipment
What drain arrangements are available for routine condensate removal?
The unit accepts float-type automatic drainage and also supports manual drain options via a standard drain port to evacuate accumulated condensate.
How is pressure stability maintained under varying inlet conditions?
The device is rated for operation down to 0.05 MPa and proof-tested to 1.5 MPa, ensuring functional integrity across typical supply pressure fluctuations.
What materials contact the airflow and condensate?
The main bowl and guard are manufactured from polycarbonate, providing chemical resistance and allowing Visual inspection of collected liquid.
How Compact and lightweight is the product for panel mounting?
The body size corresponds to a standard 40 configuration and the unit weight is approximately 0.403 kg, facilitating integration into existing manifolds and brackets.
Liens connexes
- SMC AFD series 0.01 μm 1/2 in 10 bar Pneumatic Filter 820L/min max
- SMC AFD series 0.01 μm 1/4 in 10 bar Pneumatic Filter 120L/min max
- SMC AFD series 0.01 μm 3/8 in 10 bar Pneumatic Filter 330L/min max
- SMC AFD series 5 μm 3/4 in 10 bar Pneumatic Filter 600 L/min max with Automatic drain
- SMC AFD series 5 μm 1/2 in 10 bar Pneumatic Filter 600 L/min max with Automatic drain
- SMC AMF series 0.01 μm 0.5 bar Pneumatic Filter 2000 L/min max
- SMC 600L/min G 3/8 Mist Separator 0.05 MPa to 100 bar
- SMC 600L/min G 1/2 Mist Separator 0.05 MPa to 100 bar
