SKF P 52 Pillow Block -, 19.05 mm ID
- N° de stock RS:
- 213-1980
- Référence fabricant:
- P 52
- Fabricant:
- SKF
Sous-total (1 unité)*
9,27 €
(TVA exclue)
11,22 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 9,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 213-1980
- Référence fabricant:
- P 52
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Inside Diameter | 19.05mm | |
| Product Type | Pillow Block | |
| Material | Steel | |
| Centre Height | 28.4mm | |
| Mount Hole Size | 11.2 mm | |
| Length | 56mm | |
| Mount Hole Centre-to-Centre | 86mm | |
| End Type | Open | |
| Number of Bolts | 2 | |
| Standards/Approvals | No | |
| Series | P | |
| Height | 56mm | |
| Bore Type | Round | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Inside Diameter 19.05mm | ||
Product Type Pillow Block | ||
Material Steel | ||
Centre Height 28.4mm | ||
Mount Hole Size 11.2 mm | ||
Length 56mm | ||
Mount Hole Centre-to-Centre 86mm | ||
End Type Open | ||
Number of Bolts 2 | ||
Standards/Approvals No | ||
Series P | ||
Height 56mm | ||
Bore Type Round | ||
- Pays d'origine :
- IT
SKF Pillow Block, 19.05mm ID, 28.4mm Centre Height - P 52
Want to rest easy knowing your bearing inserts are secure? Grab this pillow block from SKF to handle light-to-moderate weights in your industrial system. It reliably handles radial mass up to 1.8kN and puts an end to instability in high-vibration settings, thanks to two bolt holes that achieve a sturdy attachment to the mounting surface. You'll need standard fixings with a 10mm diameter to get installation nailed down. The simple design of this block means there's little need for maintenance, so that's one less job for your to-do list.
Features & Benefits
• 56mm height for a neat fit in setups where space is tight
• Light 0.1kg weight keeps load low and strain minimal
• Pressed steel material resists impacts, abrasion and mechanical stress to deliver long-term performance
• Simple two-part design for speedy and straightforward assembly
Applications
• Agricultural machinery
• Construction sites
• Packaging facilities
Does this pillow block have corrosion protection?
Yes. This pillow block comes with a zinc coating that boosts its corrosion resistance, so it's suitable for use in humid or wet conditions and areas where chemical contamination is likely.
Liens connexes
- SKF P 47 Pillow Block -, 12 mm ID
- SKF P 62 Pillow Block -, 25 mm ID
- SKF P 72 Pillow Block -, 30 mm ID
- SKF P 30 TF Pillow Block Bearing -, 30 mm ID
- Beco P205SS Pillow Block -, 52 mm ID
- SKF SY 3/4 TF Plummer Block House -, 19.05 mm ID
- SKF SY 510 M Pillow Block -, 90 mm ID
- SKF SY 508 M Pillow Block -, 80 mm ID