Pre-Assembled COMBI plug connectors with Push-In Connection

The COMBI plug connectors with PT Push-In technology with 24 A / 500 V can be used for signal as well as power wiring.,The plug connector PP-H 2,5/... facilitates the use of the cable housings PH 2,5/2 to PH 2,5/15.

Toolless wiring of solid conductors and conductors with ferrule
50 % less insertion force for direct plugging from 0.34 mm²
With the standardized plug-in zone, they can also be connected to COMBI basic terminal blocks with other connection methods
Easy and individual coding options on every plug connector increase wiring safety and serve the protection against improper insertion
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm² and up.

Sélectionner tout	Attribut	Valeur
	Marque	Phoenix Contact
	Pluggable Terminal Block Type	Plug
	Number of Contacts	4
	Series	PP-H 2.5/ 4
	Termination Method	Push In
	Current Rating	24A
	Voltage Rating	500 V
	Colour	Grey
	Wire Size	26 → 12 AWG

	Sélectionner tout
	Marque Phoenix Contact
	Pluggable Terminal Block Type Plug
	Number of Contacts 4
	Series PP-H 2.5/ 4
	Termination Method Push In
	Current Rating 24A
	Voltage Rating 500 V
	Colour Grey
	Wire Size 26 → 12 AWG

Phoenix Contact, PP-H 2.5/ 4, 4 Way, Pluggable Terminal Block, Plug, Push In Termination, 3209895

Frais de livraison offerts pour toute commande de plus de 75,00 €

Pre-Assembled COMBI plug connectors with Push-In Connection

Liens connexes