Knipex 35 62 1-Piece Long Nose Plier, 145mm Overall, 40mm Jaw
- N° de stock RS:
- 187-8236
- Référence fabricant:
- 35 62 145 SB
- Fabricant:
- Knipex
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
51,64 €
(TVA exclue)
62,48 €
(TVA incluse)
- N° de stock RS:
- 187-8236
- Référence fabricant:
- 35 62 145 SB
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Sub Type | Electronic Pliers | |
| Product Type | Long Nose Plier | |
| Tip Size | 6.5 to 7.5 mm² | |
| Number of Pieces | 1 | |
| Overall Length | 145mm | |
| VDE/1000V Approved | No | |
| ESD Safe | No | |
| Material | Chrome Steel | |
| Handle Type | Multi-Component | |
| Jaw Length | 40mm | |
| Jaw Width | 12mm | |
| Nose Angle | 45° | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Sub Type Electronic Pliers | ||
Product Type Long Nose Plier | ||
Tip Size 6.5 to 7.5 mm² | ||
Number of Pieces 1 | ||
Overall Length 145mm | ||
VDE/1000V Approved No | ||
ESD Safe No | ||
Material Chrome Steel | ||
Handle Type Multi-Component | ||
Jaw Length 40mm | ||
Jaw Width 12mm | ||
Nose Angle 45° | ||
Standards/Approvals No | ||
Non conforme
- Pays d'origine :
- DE
Gripping pliers - Smooth half round tips - 145mm
The polishing or mirror polishing (only finish 2) in combination with the thin oil layer offers good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles.
Features and Benefits
Mirror polished head - Flat and smooth tips
Bi-material sheathing
ESD (electrostatic dissipative) bi-material coating
Precision pliers for high-precision assembly work, e.g. in the fields of electronics and precision mechanics - For gripping, holding and bending
Precision hinge with a gap between the jaws
Smooth inside of the jaws
Carefully deburred edges
Low-friction double spring for smooth, even opening of the pliers;Chrome plated steel for ball bearings
Standards
DIN ISO 9655
Liens connexes
- Knipex 35 52 1-Piece Long Nose Plier 40mm Jaw
- Knipex 35 82 1-Piece Long Nose Plier 35mm Jaw
- Knipex 1-Piece Plier Round 40mm Jaw
- CK T3789 1-Piece Flat Nose Plier Smooth 40mm Jaw
- CK T3777 1-Piece Flat Nose Plier Serrated 40mm Jaw
- Knipex 35 42 Long Nose Pliers Flat 22,5mm Jaw
- CK 1-Piece Needle Nose Plier Needle Nose 37mm Jaw
- Knipex 1-Piece Long Nose Plier 73mm Jaw