BARTH lococube mini-PLC Series PLC I/O Module, MOSFET Output, 1-Input, Analogue Input
- N° de stock RS:
- 864-4541
- Référence fabricant:
- 0660-0600
- Fabricant:
- BARTH
Sous-total (1 unité)*
181,56 €
(TVA exclue)
219,69 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 181,56 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 864-4541
- Référence fabricant:
- 0660-0600
- Fabricant:
- BARTH
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | BARTH | |
| Product Type | PLC I/O Module | |
| Series | lococube mini-PLC | |
| Number of Inputs | 1 | |
| Output Type | MOSFET | |
| Input Type | Analogue | |
| Number of Outputs | 8 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 60°C | |
| Depth | 15mm | |
| Width | 45mm | |
| Length | 93mm | |
| Standards/Approvals | IEC | |
| Programming Language Used | miCon-L | |
| Display Included | Yes | |
| Mount Type | Panel | |
| Supply Voltage | 32, 7V dc | |
| Communication Port Type | RS232 | |
| Output Current | 8A | |
| Number of Communication Ports | 1 | |
| Battery Backup | Yes | |
| Sélectionner tout | ||
|---|---|---|
Marque BARTH | ||
Product Type PLC I/O Module | ||
Series lococube mini-PLC | ||
Number of Inputs 1 | ||
Output Type MOSFET | ||
Input Type Analogue | ||
Number of Outputs 8 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 60°C | ||
Depth 15mm | ||
Width 45mm | ||
Length 93mm | ||
Standards/Approvals IEC | ||
Programming Language Used miCon-L | ||
Display Included Yes | ||
Mount Type Panel | ||
Supply Voltage 32, 7V dc | ||
Communication Port Type RS232 | ||
Output Current 8A | ||
Number of Communication Ports 1 | ||
Battery Backup Yes | ||
- Pays d'origine :
- DE
BARTH Logic Module
The BARTH STA-600 CAN panel mount logic module is a highly integrated programmable logic controller. It provides an outstanding graphical programming capability at the lowest current consumption and small form factor. It opens up completely new application fields with space restrictions and high integration level requirements. This logic module has low power consumption and can operate over a wide range of voltages, which makes it suitable for 12V and 24V battery-powered systems. The CAN bus allows the user to connect to a variety of network components to the Mini-PLC. It has 8 analogues inputs that can vary from 0VDC to 30VDC and two digital inputs up to 10Khz. This logic module has eight power outputs up to 1.5A and 1PWM power output. This logic module can be easily programmed using miCon-L software that does not require a difficult programming language.
Features and Benefits
Reliable solid-state output
Programmable status LED
Only 1 CAN Interface
TTL-232/USB connection to the PC
Intuitive graphical programming capability
Wide operating voltage that ranges between 7VDC and 32VDC
Ultra-flat housing
Height is 10mm
Vibration resistant and rugged sealing
Very low current consumption
PLC simulation and debugging
Applications
Industrial automation
Building automation
Automotive technology
Maritime technology
Environmental technology
Light and show technology
Liens connexes
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-560 Mosfet, Solid State
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-600 PWM
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-660 Digital Solid
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-650 Digital Output,
- BARTH lococube mini-PLC Series PLC CPU for Use with STG-950 Solid State Output Analogue, DC Digital
- BARTH lococube mini-PLC Series Starter Kit for Use with STG-800 Transistor Output Analogue,
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-550 Digital Output
- BARTH lococube mini-PLC Series PLC I/O Module for Use with STG-850 PWM