Siemens PLC I/O Module for Use with S7-1200 Series, Digital, Transistor
- N° de stock RS:
- 746-5772
- Numéro d'article Distrelec:
- 301-24-482
- Référence fabricant:
- 6ES7222-1BD30-0XB0
- Fabricant:
- Siemens
Sous-total (1 unité)*
72,42 €
(TVA exclue)
87,63 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 16 unité(s) prête(s) à être expédiée(s)
- Plus 12 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 72,42 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 746-5772
- Numéro d'article Distrelec:
- 301-24-482
- Référence fabricant:
- 6ES7222-1BD30-0XB0
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Accessory Type | PLC I/O Module | |
| Range | SIMATIC | |
| Output Type | Digital, Transistor | |
| Number of Outputs | 4 | |
| For Use With | S7-1200 Series | |
| Output Current | 50 mA | |
| Cable Length | 50m | |
| Maximum Operating Temperature | +70°C | |
| Dimensions | 62 x 38 x 21 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Accessory Type PLC I/O Module | ||
Range SIMATIC | ||
Output Type Digital, Transistor | ||
Number of Outputs 4 | ||
For Use With S7-1200 Series | ||
Output Current 50 mA | ||
Cable Length 50m | ||
Maximum Operating Temperature +70°C | ||
Dimensions 62 x 38 x 21 mm | ||
- Pays d'origine :
- CN
Siemens PLC I/O Module, 24V DC Voltage Rating, 50m Cable Length - SIMATIC Series - 6ES7222-1BD30-0XB0
Need a middleman to deliver reliable signals to and from your S7-1200 controller? Get this PLC I/O module from Siemens to collect and send information to your control equipment. Thanks to four digital MOSFET outputs, the unit manages multiple circuits to simplify your data acquisition and automated process setup. As it runs on a 24V DC voltage feed, you can use this component with standard power supplies. For versatility, it supports sinking and sourcing current configurations to handle incoming and outgoing commands. When installed horizontally, it performs without a glitch in a wide temperature range between -20°C and +60°C.
Features & Benefits
• Compact size of 38 (W) x 62 (H) x 21mm (D) takes up little room in your system
• Weighs just 38g, so it puts minimal strain on your installation
• LED status indicator for convenient troubleshooting
• Weighs just 38g, so it puts minimal strain on your installation
• LED status indicator for convenient troubleshooting
How do I connect this PLC I/O module?
Thanks to the attached terminal block, wiring is a piece of cake. Just insert and secure the wires of your control equipment.
What's the maximum cable length for shielded performance?
This unit delivers reliable, shielded performance over a cable length of up to 50m. This means you can easily reach distant equipment without worrying about signal interference.
Liens connexes
- Siemens SIMATIC S7-12 Series PLC I/O Module for Use with S7-1200 Series Digital 24 V ac/dc
- Siemens PLC I/O Module for Use with SIMATIC S7-1200 Series Digital
- Siemens TM3 Series PLC I/O Module for Use with SIMATIC S7-1200 Series Digital
- Siemens SIMATIC S7-1200 Series PLC I/O Module for Use with SIMATIC S7-1200 Series Digital Output
- Siemens TM3 Series PLC I/O Module for Use with SIMATIC S7-1200 Series Digital, 24 V
- Siemens SIMATIC S7-1200 Series PLC I/O Module for Use with S7-1200 Series Digital
- Siemens PLC I/O Module for Use with S7-1200 Series Digital
- Siemens SIMATIC S7-1200 G2 Series Module for Use with I/O System 24 V
