Siemens 6ES7134 Series Analogue Input Module for Use with 1 A/5 A Current Transformer
- N° de stock RS:
- 272-6671
- Référence fabricant:
- 6ES7134-6PA01-0BU0
- Fabricant:
- Siemens
Sous-total (1 unité)*
232,57 €
(TVA exclue)
281,41 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 8 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 232,57 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 272-6671
- Référence fabricant:
- 6ES7134-6PA01-0BU0
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Product Type | Analogue Input Module | |
| Accessory Type | Analogue Input Module | |
| Series | 6ES7134 | |
| For Use With | 1 A/5 A Current Transformer | |
| Hazardous Area Certification | No | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Product Type Analogue Input Module | ||
Accessory Type Analogue Input Module | ||
Series 6ES7134 | ||
For Use With 1 A/5 A Current Transformer | ||
Hazardous Area Certification No | ||
Standards/Approvals No | ||
- Pays d'origine :
- DE
Siemens 6ES7134 Series Analogue Input Module, 1 A/5 A Current Transformer Compatibility - 6ES7134-6PA01-0BU0
This analogue input module is a DIN-rail mounted device for energy and electrical measurement in industrial automation. It acquires voltage, current and power-related quantities from networks with TT, TN or IT earthing and works with external current transformers to measure up to three phases Plus neutral. The module integrates into Siemens PLC environments and supports cyclic and acyclic access to measured values for process control and monitoring.
Features & Benefits
• Supports 1A or 5A current transformers for flexible installation
• TRMS voltage and current measurement for accurate distorted waveforms
• Energy and power measurement including Active and reActive values
• Bandwidth 3.2kHz with harmonics up to 63rd for detailed analysis
• Isolation tested between channels and backplane for safe integration
• TRMS voltage and current measurement for accurate distorted waveforms
• Energy and power measurement including Active and reActive values
• Bandwidth 3.2kHz with harmonics up to 63rd for detailed analysis
• Isolation tested between channels and backplane for safe integration
**Applications**
• Suitable for substation metering using CT secondary outputs
• Used for building energy monitoring with three-phase systems
• Ideal for integration into PLC-based energy management systems
• Can be used for power factor and reactive compensation monitoring
• Used for building energy monitoring with three-phase systems
• Ideal for integration into PLC-based energy management systems
• Can be used for power factor and reactive compensation monitoring
What supply voltage do I need to operate the module?
It requires a 24 V DC supply and accepts a voltage range from 19.2V to 28.8V.
How many channels and what update rate are available for measured values?
The device updates all measured and calculated values consistently in approximately 50ms for the complete channel set.
What diagnostic information can be obtained from the module?
It provides supply-voltage monitoring, channel-status LEDs, module diagnostics including hardware interrupts, limit-value alarms and I&M0 to I&M3 data.
Which engineering tools support configuration and firmware updates?
Configuration is possible via STEP7 TIA Portal from the specified version and also through provided GSD files for fieldbus integration
firmware updates are supported.
What environmental limits apply for installation altitude and temperature?
It can operate up to 3000m installation altitude with specified restrictions above 2000 m and ambient operating temperatures down to −30°C and up to 60°C depending on orientation.
Liens connexes
- Siemens PLC I/O Module 6ES7134-8GF00 Analogue Input 28.8V
- Siemens I/O Module SIMATIC ET 200SP Analogue 28.8V
- Siemens SIMATIC ET 200 SP Series Analogue Input Module for Use with SIMATIC
- Siemens Analog Input Module SIMATIC Analogue 28.8V
- Siemens Electronic Module ET 200iSP Analogue 28.8V
- Siemens I/O SYSTEM 750 Series Analogue Input Module for Use with SIMATIC ET 200SP
- ABB Analogue Input Module KNX Analogue
- TECO Westinghouse Analogue Input Module Analogue Current/Voltage for use with Programmable Logic Relay