Siemens SIMATIC S7-400 Series Series Power Supply for Use with SIMATIC S7-400, 230 V
- N° de stock RS:
- 226-3972
- Numéro d'article Distrelec:
- 303-99-809
- Référence fabricant:
- 6ES7407-0KA02-0AA0
- Fabricant:
- Siemens
Sous-total (1 unité)*
1 051,58 €
(TVA exclue)
1 272,41 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s)
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 051,58 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 226-3972
- Numéro d'article Distrelec:
- 303-99-809
- Référence fabricant:
- 6ES7407-0KA02-0AA0
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Accessory Type | Power Supply | |
| Range | S7-400 | |
| Series | SIMATIC S7-400 Series | |
| For Use With | SIMATIC S7-400 | |
| Supply Voltage | 230 V | |
| Output Current | 10 A | |
| Maximum Operating Temperature | +60°C | |
| Dimensions | 50 x 290 x 217 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Accessory Type Power Supply | ||
Range S7-400 | ||
Series SIMATIC S7-400 Series | ||
For Use With SIMATIC S7-400 | ||
Supply Voltage 230 V | ||
Output Current 10 A | ||
Maximum Operating Temperature +60°C | ||
Dimensions 50 x 290 x 217 mm | ||
- Pays d'origine :
- DE
Siemens Power Supply, Rack Mounting, 120 to 230V AC/DC Supply Voltage - SIMATIC Series - 6ES7407-0KA02-0AA0
Get your control-system modules up and running with this Siemens power supply. The unit converts input voltages to 5 and 24V DC loads, adjusting mains supplies to work with your system in a flash. With its short-circuit protection, the device cuts power faults off as they pop up to reduce the risk of hardware damage. Mounting the module takes no time as it slips onto a standard rack (such as 226-3954). LED indicators are on duty to show input and fault status at a glance, making inspections hassle-free. Power supplies like this are essential bits of kit in food production lines and fluid management systems.
Features & Benefits
• Power loss of just 20W to minimise energy waste
• Continues functioning for up to 20ms after a mains failure, reducing disruption from unstable connections
• Built-in potential separation between input and output to prevent damage from surges
• Simple 3-wire electrical connection for quick installation
Can I fit a backup battery to this power supply?
Yes, this unit takes one 3.6V AA battery that provides backup energy to keep your system data safe if there's a power outage.
Liens connexes
- Siemens SIMATIC S7-400 Series Series Power Supply for Use with SIMATIC S7-400
- Siemens SIMATIC S7-400 Series Series Power Supply for Use with SIMATIC S7-400, 230 V
- Siemens SIMATIC S7-400 Series Series Rack for Use with SIMATIC S7-400
- Siemens SIMATIC S7-400 Series Series Digital I/O Module for Use with SIMATIC S7-400
- Siemens SIMATIC S7-400 Series Series Connector for Use with SIMATIC S7-400
- Siemens SIMATIC S7-400 Series Series Empty Slot Cover for Use with SIMATIC S7-400
- Siemens SIMATIC S7-400 Series Series Coupler for Use with SIMATIC S7-400
- Siemens SIMATIC S7 Series Series Memory Card for Use with S7-400
