Omron NX-CIF Series Communication Module for Use with Sysmac Machine Automation Controllers and CJ2 Series PLC's
- N° de stock RS:
- 215-8190
- Numéro d'article Distrelec:
- 302-29-117
- Référence fabricant:
- NX-CIF210
- Fabricant:
- Omron
Sous-total (1 unité)*
601,46 €
(TVA exclue)
727,77 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- 1 unité(s) expédiée(s) à partir du 03 juin 2026
- Plus 3 unité(s) expédiée(s) à partir du 30 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 601,46 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 215-8190
- Numéro d'article Distrelec:
- 302-29-117
- Référence fabricant:
- NX-CIF210
- Fabricant:
- Omron
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Omron | |
| Product Type | Communication Module | |
| Accessory Type | Serial Communication Interface Unit | |
| Series | NX-CIF | |
| For Use With | Sysmac Machine Automation Controllers and CJ2 Series PLC's | |
| Standards/Approvals | and KC:KC Registration, ANSI/ISA 12.12.01, cULus:Listed (UL508), EU:EN 61131-2, LR, NK, RCM | |
| Hazardous Area Certification | No | |
| Communication Protocol | EtherCAT | |
| Sélectionner tout | ||
|---|---|---|
Marque Omron | ||
Product Type Communication Module | ||
Accessory Type Serial Communication Interface Unit | ||
Series NX-CIF | ||
For Use With Sysmac Machine Automation Controllers and CJ2 Series PLC's | ||
Standards/Approvals and KC:KC Registration, ANSI/ISA 12.12.01, cULus:Listed (UL508), EU:EN 61131-2, LR, NK, RCM | ||
Hazardous Area Certification No | ||
Communication Protocol EtherCAT | ||
The Omron NX I/O provides simplicity and flexibility in connecting serial devices to EtherCAT. It is mounted to NX-series EtherCAT coupler unit and connect various types of serial devices. The serial line monitor on the Sysmac Studio helps easily and reliably connect serial devices.
Just 12 mm wide, saving space in your cabinet.
Three models are available with a choice of one RS-422A/485, one RS-232C, or two RS-232C ports.
Screwless push-in terminal block (1-port model) and D-Sub connector (2-port model) significantly reduce wiring work.
No-protocol communications are supported as the communications protocol.
The maximum baud rate is 230.4 kbps. The baud rate can be selected to match the connected serial devices.
The settings are backed up and saved in the EtherCAT Coupler Unit. This facilitates commissioning and maintenance.
The serial line monitor enables you to check the communications status with serial devices on the Sysmac Studio for easy and reliable startup
of the devices.
Liens connexes
- Omron NX I/O Series I/O Unit for Use with Sysmac Machine Automation Controllers and CJ2 Series PLC's
- Omron Sysmac Studio Series PLC Accessory for Use with EtherCAT slaves NJ/NX-series CPU
- Omron NX Series Interface Module for Use with Sysmac System
- Omron Cj2 Series Battery for Use with SYSMAC CJ Series
- Omron NX-CIF Series PLC Accessory for Use with NX-series EtherCAT Coupler Unit
- Omron SYSMAC Series I/O Unit for Use with NX
- Omron CJ2 Family Series I/O Unit for Use with SYSMAC CJ Series
- CIF PCB Preparation & Etching Machine