Siemens 1766 Series Input Unit for Use with SIMATIC ET 200SP
- N° de stock RS:
- 203-4183
- Numéro d'article Distrelec:
- 110-91-325
- Référence fabricant:
- 6ES7134-6JD00-0CA1
- Fabricant:
- Siemens
Sous-total (1 unité)*
244,20 €
(TVA exclue)
295,48 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 15 unité(s) prête(s) à être expédiée(s)
- Plus 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 244,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 203-4183
- Numéro d'article Distrelec:
- 110-91-325
- Référence fabricant:
- 6ES7134-6JD00-0CA1
- Fabricant:
- Siemens
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Siemens | |
| Product Type | Input Unit | |
| Accessory Type | Input Unit | |
| Series | 1766 | |
| For Use With | SIMATIC ET 200SP | |
| Standards/Approvals | No | |
| Hazardous Area Certification | No | |
| Communication Protocol | I/O | |
| Supply Voltage | 24V | |
| Sélectionner tout | ||
|---|---|---|
Marque Siemens | ||
Product Type Input Unit | ||
Accessory Type Input Unit | ||
Series 1766 | ||
For Use With SIMATIC ET 200SP | ||
Standards/Approvals No | ||
Hazardous Area Certification No | ||
Communication Protocol I/O | ||
Supply Voltage 24V | ||
- Pays d'origine :
- DE
Siemens Input Unit, 4 Analogue Inputs, 0.75W Power Loss - SIMATIC Series - 6ES7134-6JD00-0CA1
Hook sensing equipment up to your automated system with this input unit from Siemens. With support for resistance, voltage and temperature measurements, the versatile device processes many kinds of signals. There's no need to worry about accuracy, as this component converts readings to at least ±0.1% of the measured value every time. Space for four inputs makes this a handy sensor connection point. Thanks to the module's diagnostic LED indicators, it's easy to check power, input and fault status at a glance. You'll commonly find it used to support fluid management and cold storage systems.
Features & Benefits
• Tool-free DIN rail mounting for easy installation
• Channel conversion time of 50ms means it quickly processes inputs to provide up-to-the-moment readings
• Slim measurements of 15 (W) x 73 (H) x 58mm (D) so it slots into cramped cabinets
• Low power loss of 0.75W to cut down on energy usage
• 16-bit resolution ensures detailed readings
How do I know where to connect my sensor wires on this unit?
Its front plate comes with a wiring diagram, which clearly labels the terminals to guide your conductors to their destinations.
Liens connexes
- Siemens ET 200 Series Input Unit for Use with SIMATIC ET 200SP
- Siemens 1763 Series Input Unit for Use with SIMATIC ET 200SP
- Siemens 1762 Series Input Unit for Use with SIMATIC ET 200SP
- Siemens SIMATIC ET 200SP Series Input Unit for Use with SIMATIC ET 200SP
- Siemens ET 200SP Series Input Unit for Use with SIMATIC ET 200SP
- Siemens SIMATIC Series Input Unit for Use with SIMATIC ET 200SP
- Siemens Analog Input Module SIMATIC Analogue 28.8V
- Siemens SIMATIC ET 200SP Series Base Unit for Use with SIMATIC ET 200SP