Igus JFM-1214-07 12mm Bore Plain Bearing, 14 mm OD
- N° de stock RS:
- 750-6833
- Référence fabricant:
- JFM-1214-07
- Fabricant:
- Igus
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 sachet de 4 unités)*
7,22 €
(TVA exclue)
8,74 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 31 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Sachet(s) | Le Sachet | Prix par unité* |
|---|---|---|
| 1 - 4 | 7,22 € | 1,805 € |
| 5 - 9 | 6,94 € | 1,735 € |
| 10 + | 6,79 € | 1,698 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 750-6833
- Référence fabricant:
- JFM-1214-07
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Plain Bearing | |
| Bore Diameter | 12mm | |
| Sub Type | Flange Bearing | |
| Outside Diameter | 14mm | |
| Material | Iglidur J | |
| Width | 7mm | |
| Series | JFM | |
| Standards/Approvals | RoHS, DIN EN ISO 846 | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Plain Bearing | ||
Bore Diameter 12mm | ||
Sub Type Flange Bearing | ||
Outside Diameter 14mm | ||
Material Iglidur J | ||
Width 7mm | ||
Series JFM | ||
Standards/Approvals RoHS, DIN EN ISO 846 | ||
- Pays d'origine :
- DE
iglidur® J Bush Kits
iglidur® J plain bearings may be used for long-life applications, and are also suitable for use with soft shafts. The iglidur® J plain bearings are designed to provide the lowest coefficient of friction while running dry, and offer a low stick-slip tendency.
Waterproof material
Extremely low friction
Can be used with stainless steel or anodised aluminium shafts
Resistant to dirt and dust
No lubrication required
iglidur® kits offering a variety of plain plastic bush options in convenient kit form from igus®. iglidur® polymer bearings offer high performance characteristics across a wide and varied field of application including, but not limited to: automotive (gear shift linkage), mechanical excavator (operator's shock absorbing seat), mountain bike (suspension and other components), packaging machinery (lubricant-free bearings), catering equipment (chemical and corrosion-resistant bearings), model aircraft (aileron mounting), bottling plant (polymer bearings), offshore oil industry (plastic bearings for corrosive environment), and a whole host of other uses within a wide variety of applications.
Note
iglidur® J plain bearings are not suitable for use where a maximum permissible surface pressure of 35 MPa may occur, where high pressures may be present, where there are short-term temperature increases (above 120°C), or applications where a low-cost bearing for occasional movement is required.
Liens connexes
- Igus JFM-1214-07 12 mm Bore Plain Bearing, 14 mm OD
- Igus JFM-1214-12 12 mm Bore Plain Bearing, 14 mm OD
- Igus JFM-1214-15 12 mm Bore Plain Bearing, 14 mm OD
- Igus JFM-1214-04 12 mm Bore Plain Bearing, 14 mm OD
- Igus JFM-1214-05 12 mm Bore Plain Bearing, 14 mm OD
- Igus JFM-1214-09 12 mm Bore Plain Bearing, 14 mm OD
- Igus MFM-1214-07 12 mm Bore Plain Bearing, 14 mm OD
- Igus GFM-1214-07 12 mm Bore Plain Bearing, 14 mm OD