SKF PCM 202210 E 20mm Bore Plain Bearing, 22 mm OD, 48 kN
- N° de stock RS:
- 233-0665
- Référence fabricant:
- PCM 202210 E
- Fabricant:
- SKF
Sous-total (1 unité)*
2,22 €
(TVA exclue)
2,69 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 107 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2,22 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 233-0665
- Référence fabricant:
- PCM 202210 E
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Plain Bearing | |
| Bore Diameter | 20mm | |
| Outside Diameter | 22mm | |
| Static Load Rating | 48kN | |
| Dynamic Load Rating | 15.3kN | |
| Material | Polytetrafluoroethylene | |
| Series | PCM | |
| Width | 10mm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Plain Bearing | ||
Bore Diameter 20mm | ||
Outside Diameter 22mm | ||
Static Load Rating 48kN | ||
Dynamic Load Rating 15.3kN | ||
Material Polytetrafluoroethylene | ||
Series PCM | ||
Width 10mm | ||
Standards/Approvals No | ||
SKF Plain Bearing, PTFE Composite Body, 48kN Static Load Rating, 20mm Bore, 22mm OD - PCM 202210 E
Need a slim support element for your system's loads? Turn to this SKF plain bearing. It has a wall thickness of just 2mm, so takes up minimal space and calls for low clearance, but carries dynamic loads up to 15.3kN. This means it helps your equipment sail through intense handling tasks. Thanks to its PTFE running layer, the component works without friction to cut excessive wear to itself or the shaft out of the equation. Reliably good heat dissipation means your system runs cool.
Features & Benefits
• Durable sheet steel backing for effective impact resistance, so safe to use in demanding settings
• Tolerates sliding movement up to 2m/s, so keeps up with swivelling and stops misalignment damage
• Self-lubricating body removes the need for manual greasing
• Performs reliably in extreme temperatures from -200°C to +250°C
Applications
• Material handling
• Mining equipment
• Textile manufacturing
Can I use this product in a wet application?
Yes, the bearing's tin-plated backing shrugs off corrosion caused by moisture. This makes it a safe bet for applications that use a limited amount of water.
Liens connexes
- SKF PCM 252825 E 25 mm Bore Plain Bearing 150 kN
- SKF PCM 121415 E 12 mm Bore Plain Bearing 45 kN
- SKF PCM 101215 E 10 mm Bore Plain Bearing 37.5 kN
- SKF PCM 252815 E 25 mm Bore Plain Bearing 88 kN
- SKF PCM 101210 E 10 mm Bore Plain Bearing 25 kN
- SKF PCM 101208 E 10 mm Bore Plain Bearing 20 kN
- SKF PCM 202320 E 20 mm Bore Plain Bearing 96.5 kN
- SKF PCM 060806 E 6 mm Bore Plain Bearing 9 kN