INA GE6-UK 6mm Bore Plain Bearing, 14 mm OD, 9 N
- N° de stock RS:
- 191-3884
- Référence fabricant:
- GE6-UK
- Fabricant:
- INA
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
23,05 €
(TVA exclue)
27,89 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 13 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 23,05 € |
| 5 - 9 | 22,14 € |
| 10 - 24 | 21,67 € |
| 25 + | 21,19 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 191-3884
- Référence fabricant:
- GE6-UK
- Fabricant:
- INA
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | INA | |
| Product Type | Plain Bearing | |
| Bore Diameter | 6mm | |
| Outside Diameter | 14mm | |
| End Type | Open | |
| Static Load Rating - Radial | 9N | |
| Material | Steel | |
| Standards/Approvals | No | |
| Series | GE | |
| Width | 9mm | |
| Sélectionner tout | ||
|---|---|---|
Marque INA | ||
Product Type Plain Bearing | ||
Bore Diameter 6mm | ||
Outside Diameter 14mm | ||
End Type Open | ||
Static Load Rating - Radial 9N | ||
Material Steel | ||
Standards/Approvals No | ||
Series GE | ||
Width 9mm | ||
Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction
Very good Seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks
Radial insert ball bearings with a cylindrical outer ring are highly suitable where:
A cylindrical housing bore is already present
The outer ring of the bearings is to be located by means of easy-to-fit snap rings
Radial insert ball bearings with a profiled bore are highly suitable where:
Shafts must transmit very high torques
Radial insert ball bearings with a rubber interliner are highly suitable where:
Vibrations and shocks must be supported
Damping of running noise is required
Liens connexes
- INA GE6-DO 6mm Bore Plain Bearing 17 kN
- INA GE6-FW 6mm Bore Plain Bearing 14600 N
- INA GE10-UK 10mm Bore Plain Bearing 21600 N
- INA GE25-UK 25mm Bore Plain Bearing 128000 N
- INA GE20-UK 20mm Bore Plain Bearing 78300 N
- INA GE12-UK 12mm Bore Plain Bearing 28400 N
- INA GE8-UK 8mm Bore Plain Bearing 14600 N
- INA GE15-UK 15mm Bore Plain Bearing 44.6 kN