SKF PBM 607060 M1G1 60mm Bore Bushing, 70 mm OD
- N° de stock RS:
- 465-260
- Référence fabricant:
- PBM 607060 M1G1
- Fabricant:
- SKF
Sous-total (1 unité)*
150,04 €
(TVA exclue)
181,55 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 13 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 150,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 465-260
- Référence fabricant:
- PBM 607060 M1G1
- Fabricant:
- SKF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | SKF | |
| Product Type | Bushing | |
| Sub Type | Straight Bushing | |
| Bore Diameter | 60mm | |
| Outside Diameter | 70mm | |
| Material | Solid Bronze | |
| Standards/Approvals | No | |
| Width | 60mm | |
| Series | PBM | |
| Sélectionner tout | ||
|---|---|---|
Marque SKF | ||
Product Type Bushing | ||
Sub Type Straight Bushing | ||
Bore Diameter 60mm | ||
Outside Diameter 70mm | ||
Material Solid Bronze | ||
Standards/Approvals No | ||
Width 60mm | ||
Series PBM | ||
Non conforme
- Pays d'origine :
- SE
SKF PBM Series Bushing, 60mm Bore Size, 70mm Outside Diameter - PBM 607060 M1G1
This bushing is a solid bronze plain bearing designed to provide low-friction support for rotating or sliding shafts in industrial equipment. It is intended for heavy-duty applications where Durable bearing surfaces are required, and it is commonly used as a replaceable sleeve to maintain shaft alignment and reduce wear in mechanical assemblies.
Features and Benefits:
• Solid bronze construction delivers high load capacity and wear resistance
• Straight sleeve form enables simple press-fit installation
• 60mm bore offers compatibility with common metric shafts
• 70mm outside diameter provides robust housing contact area
• 60mm width supplies extended bearing surface for load distribution
• Straight sleeve form enables simple press-fit installation
• 60mm bore offers compatibility with common metric shafts
• 70mm outside diameter provides robust housing contact area
• 60mm width supplies extended bearing surface for load distribution
Applications
• Suitable for bearings in automation actuators and gantries
• Ideal for sliding interfaces in electrical switchgear mechanisms
• Used with rotating shafts in industrial motors and gearboxes
• Can be used for replacement in legacy mechanical assemblies
• Ideal for sliding interfaces in electrical switchgear mechanisms
• Used with rotating shafts in industrial motors and gearboxes
• Can be used for replacement in legacy mechanical assemblies
How should it be installed to ensure correct radial support?
Press-fit into a housing bore with controlled interference to maintain concentricity and avoid shaft run-out.
What maintenance approach extends service life under heavy loads?
Monitor for wear and maintain appropriate lubrication intervals compatible with bronze bearings to minimise surface abrasion.
How does the material behave under continuous operation at elevated loads?
The bronze alloy sustains plasticity under load, providing conformability that helps prevent seizure while gradually wearing to preserve shaft integrity.
What are the considerations when replacing an existing sleeve?
Verify matching internal diameter, housing fit, and axial support to ensure the new sleeve restores original clearance and load distribution.
Liens connexes
- SKF PBM 506050 M1G1 50mm Bore Bearing Assembly, 60 mm OD
- SKF PBMF 506050 M1G1 50mm Bore Bushing, 60 mm OD
- SKF PBMF 607560 M1G1 60mm Bore Bearing Assembly, 75 mm OD
- SKF PCM 606540 E 60mm Bore Bushing 585 kN
- SKF PWM 607040 60mm Bore Spherical Bearing, 70 mm OD
- SKF Plain Bush 70 mm OD
- SKF GAC 60 F 60mm Bore Plain Bearing 95 mm OD
- SKF PCM 606560 M 60mm Bore Bearing Assembly 880 kN