Microchip , 1-Channel Ethernet Transceiver 48-Pin QFN, KSZ9031RNXCC
- N° de stock RS:
- 177-3548
- Référence fabricant:
- KSZ9031RNXCC
- Fabricant:
- Microchip
Sous-total (1 plateau de 260 unités)*
536,64 €
(TVA exclue)
649,22 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 300 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le plateau* |
|---|---|---|
| 260 + | 2,064 € | 536,64 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3548
- Référence fabricant:
- KSZ9031RNXCC
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Standard Supported | 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 | |
| Number of Channels per Chip | 1 | |
| Typical Data Rate | 1000Mbit/s | |
| Power Supply Type | Single | |
| Typical Operating Supply Voltage | 3.3 V | |
| Mounting Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 48 | |
| Dimensions | 7 x 7 x 0.8mm | |
| Maximum Operating Temperature | +70 °C | |
| Automotive Standard | AEC-Q100 | |
| Minimum Operating Temperature | 0 °C | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Standard Supported 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 | ||
Number of Channels per Chip 1 | ||
Typical Data Rate 1000Mbit/s | ||
Power Supply Type Single | ||
Typical Operating Supply Voltage 3.3 V | ||
Mounting Type Surface Mount | ||
Package Type QFN | ||
Pin Count 48 | ||
Dimensions 7 x 7 x 0.8mm | ||
Maximum Operating Temperature +70 °C | ||
Automotive Standard AEC-Q100 | ||
Minimum Operating Temperature 0 °C | ||
- Pays d'origine :
- TW
The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.
Single-chip 10/100/1000Mbps Ethernet transceiver
KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
On-chip termination resistors for the differential pairs
On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
Jumbo frame support up to 16KB
125MHz Reference Clock Output
Energy-detect power-down mode
KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
On-chip termination resistors for the differential pairs
On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
Jumbo frame support up to 16KB
125MHz Reference Clock Output
Energy-detect power-down mode