ProMinent 150702 pH PH Probe, CAN Interface
- N° de stock RS:
- 531-292
- Référence fabricant:
- 150702
- Fabricant:
- ProMinent
Sous-total (1 unité)*
344,62 €
(TVA exclue)
416,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 9 unité(s) prête(s) à être expédiée(s)
- Plus 34 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 344,62 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 531-292
- Référence fabricant:
- 150702
- Fabricant:
- ProMinent
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ProMinent | |
| Product Type | PH Probe | |
| Electrode Type | pH | |
| Interface Type | CAN | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque ProMinent | ||
Product Type PH Probe | ||
Electrode Type pH | ||
Interface Type CAN | ||
Standards/Approvals No | ||
ProMinent PH Sensor
The ProMinent PH sensor is a high tech device used to monitor and control pulsing liquids. It helps in online measurement and adjustment of pH values that must be as accurate, fast and reliable as possible. The pH sensor has of range 1 to 12. The pH sensor is optimised for use in portable water treatment, swimming pools and hot tubs at up to 60°C/3 bar. The production of these pH sensors is subject to very strict quality controls (the example, in accordance with RoHS guidelines). Routine steps are automated, but critical steps are carried out manually under expert supervision for optimum reproducible quality and cost reduction.
Product Application Information:
This pH sensor has been optimised for use in potable water treatment, swimming pools and hot tubs at up to 60°C/3 bar.
Features and Benefits
Precise and reliable pH measurement enables efficient processes and maximum process reliability
Wide range of special versions for fitting length, cable length, and plugs for made-to-measure connection to your process
SN6 plug-in head electrical connection
Glass sensor shaft
Vertical up to 25° fitting position
Fitting length 120 ±3mm
12mm shaft diameter
Ceramic diaphragm
Maximum pressure is 3.0bar
Minimum conductivity is 150μS/cm
Electrolyte gel containing potassium chloride
Applications
Chemical processes
Chemically contaminated water
Swimming pool water, potable water
Process water
Cooling water, waste water
Seawater
Suspensions, sludge, and emulsions
Exhaust air scrubber, semiconductor industry, and electroplating
Certifications
IP65 rated
Liens connexes
- ProMinent 304956 pH PH Probe, CAN Interface
- ProMinent 790488 pH pH Sensor Probe, CAN Interface
- ProMinent 792919 Free Chlorine pH pH Sensor Probe, 0 to 10 ppm
- Extech PH105 Surface pH PH Probe BNC Interface
- Testo 0650 2061 pH PH Probe BNC Interface
- Hanna Instruments HI-12963 Ph pH PH Probe DIN Interface
- Brand-Rex MIKROE-4448 Plastic pH PH Probe, BNC Interface
- Endress+Hauser CPS11-1BA2ESA Glass pH PH Probe DIN Interface