Adaptive Peltier Module, 37.4 W, 3.9 A, 15.7V, 30 mm x 30mm x 3.6 mm
- N° de stock RS:
- 490-1496
- Référence fabricant:
- ETH-127-10-13-RS
- Fabricant:
- Adaptive
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Produit de remplacement
Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:
la pièce
86,26 €
(TVA exclue)
104,37 €
(TVA incluse)
- N° de stock RS:
- 490-1496
- Référence fabricant:
- ETH-127-10-13-RS
- Fabricant:
- Adaptive
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Adaptive | |
| Product Type | Peltier Module | |
| Maximum Cooling Capacity | 37.4W | |
| Maximum Temperature Difference | 73°C | |
| Maximum Current | 3.9A | |
| Thickness | 3.6mm | |
| Maximum Voltage | 15.7V | |
| Lead Wire Type | Unstripped | |
| Standards/Approvals | RoHS | |
| Length | 30mm | |
| Width | 30mm | |
| Series | ETH | |
| Sélectionner tout | ||
|---|---|---|
Marque Adaptive | ||
Product Type Peltier Module | ||
Maximum Cooling Capacity 37.4W | ||
Maximum Temperature Difference 73°C | ||
Maximum Current 3.9A | ||
Thickness 3.6mm | ||
Maximum Voltage 15.7V | ||
Lead Wire Type Unstripped | ||
Standards/Approvals RoHS | ||
Length 30mm | ||
Width 30mm | ||
Series ETH | ||
- Pays d'origine :
- CN
Thermoelectric Cooler Modules, Adaptive
The Thermoelectric modules utilise the Peltier phenomenon principle to pump heat when voltage is applied.
Effective cooling power from mW to a hundred of Watts
Max hot side temperature Th = 90°C for best long term performance
Modules can be bonded using heat sink bonder
Applications in refrigeration and power generation
Silicone sealed options
Thermoelectric Modules - Peltier Effect
A range of semiconductor thermoelectric devices working on the Peltier effect. When supplied with a suitable electric current, they can either cool or heat. When subject to an externally applied temperature gradient these devices will generate a small amount of electrical power.The larger devices can be used for cooling or controlling the temperature of sub-assemblies. The small size of the mini module makes it ideally suited for cooling miniature electronic components such as infra-red detector chips, microwave IC's, fibre-optic lasers and detectors.,Alternatively, it may be used to minimise the effects of temperature coefficients on oscillator stability, reference voltages, amplifier offsets etc. by providing temperature control.
Solid-state long term stability
Generates no acoustic noise