Block 24 V 1 Output Pin PCB Transformer, C-UL-US, ENEC 10 (VDE) 2 VA
- N° de stock RS:
- 732-0376
- Référence fabricant:
- VB 2,0/1/24
- Fabricant:
- Block
Visuel non contractuel
Offre groupée disponible
Sous-total (1 unité)*
9,58 €
(TVA exclue)
11,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Dernier stock RS
- 7 dernière(s) unité(s), prête(s) à l'envoi d'un autre centre de distribution
Unité | Prix par unité |
|---|---|
| 1 - 9 | 9,58 € |
| 10 - 24 | 9,11 € |
| 25 - 49 | 8,34 € |
| 50 + | 7,60 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 732-0376
- Référence fabricant:
- VB 2,0/1/24
- Fabricant:
- Block
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Block | |
| Product Type | PCB Transformer | |
| Secondary Voltage | 24 V | |
| Primary Voltage | 230 V | |
| Number of Outputs | 1 | |
| Length | 32.3mm | |
| Width | 27.3 mm | |
| Power | 2VA | |
| Depth | 26.8mm | |
| Weight | 0.10kg | |
| Mount Type | Pin | |
| Isolation Voltage | 5000V | |
| Efficiency | 52% | |
| Maximum Operating Temperature | 70°C | |
| Minimum Operating Frequency | 50Hz | |
| Series | VB 2.0/1/24 | |
| Standards/Approvals | C-UL-US, ENEC 10 (VDE) | |
| Maximum Operating Frequency | 60Hz | |
| Sélectionner tout | ||
|---|---|---|
Marque Block | ||
Product Type PCB Transformer | ||
Secondary Voltage 24 V | ||
Primary Voltage 230 V | ||
Number of Outputs 1 | ||
Length 32.3mm | ||
Width 27.3 mm | ||
Power 2VA | ||
Depth 26.8mm | ||
Weight 0.10kg | ||
Mount Type Pin | ||
Isolation Voltage 5000V | ||
Efficiency 52% | ||
Maximum Operating Temperature 70°C | ||
Minimum Operating Frequency 50Hz | ||
Series VB 2.0/1/24 | ||
Standards/Approvals C-UL-US, ENEC 10 (VDE) | ||
Maximum Operating Frequency 60Hz | ||
- Pays d'origine :
- DE
Transformers PCB Mount, Short Circuit Proof, VB & PT Series
230Va.c. 50 to 60Hz primary
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Approvals
ENEC 10; UL recognised component
Standards
EN 61558